Description
Edma suction cup 100 kg is a battery-powered electric mini suction cup for handling narrow tiles and panels. Its built-in pump creates and maintains the vacuum automatically. The suction base measures 230 x 95 mm and the maximum lifting capacity is 100 kg.
The display shows the vacuum in real time. The pump stops when the vacuum corresponds to a 150 kg hold and restarts if the value drops below 120 kg.
The power source is an integrated 3.7 V / 2000 mAh lithium-ion battery with a run time of up to 8 hours on one charge. The battery is charged with a USB-C cable.
Two tapping wedges are integrated into the body for tapping the tile into place during installation. The suction cup is suitable for smooth and lightly textured surfaces, and it is CE marked. It weighs 1.1 kg.
Edma suction cup 100 kg, intended use and suitability:
The suction cup is designed for lifting, moving and positioning narrow and long formats.
- Tile installation: lifting narrow floor and wall tiles, such as wood-effect plank tiles, and aligning them in the mortar bed.
- Stone and ceramic panels: handling and moving smooth and lightly textured panels on site.
- Finishing tiling: fine-adjusting the tile into place with the integrated tapping wedges while the suction cup is attached to the tile.
Package contents:
Delivery includes:
- Edma battery-powered suction cup with integrated tapping wedges
- USB-C charging cable
- Two cotton replacement dust filters
- Carry bag
Features:
The automatic control keeps the vacuum even throughout the work step.
- Pressure display: the vacuum level is shown on the display throughout use.
- Automatic control: the pump starts and stops by itself according to the vacuum limits.
- Double-safety release: releasing requires a double press and a pull on the tab, which prevents accidental release.
- Tapping wedges: two integrated wedges for tapping the tile into place.
- USB-C charging: the battery is charged with a standard USB-C cable.
- Replaceable filter: the cotton filter keeps dust out of the pump.
Technical specifications:
Technical values of the device:
- Lifting capacity: 100 kg
- Suction base dimensions: 230 x 95 mm
- Battery: Li-ion 3.7 V, 2000 mAh, integrated
- Run time: up to 8 h
- Charging: USB-C
- Pump control: stops at the 150 kg level, starts below the 120 kg level
- Surfaces: smooth and lightly textured
- Weight: 1.1 kg
- Markings: CE
Edma suction cup 100 kg instructions for use:
Fully charge the battery with the USB-C cable before use. Clean and dry the contact surface, place the suction base in the middle of the tile and switch the device on. Wait until the display shows sufficient vacuum before lifting the piece. Release by pressing the release button twice and pulling the tab. Check the dust filter regularly and replace a dirty filter. Store the device in the carry bag.
Warnings:
Follow these instructions to ensure safe use:
- Do not exceed the 100 kg lifting capacity.
- Do not lift the piece before the display shows sufficient vacuum.
- Do not use on porous, dirty or wet surfaces where the vacuum does not hold.
- Do not stand under the piece being lifted.
- Charge the battery only with the supplied USB-C cable or an equivalent one.
Frequently asked questions (FAQ):
The most common questions about the product:
How much can the Edma suction cup 100 kg lift?
The maximum lifting capacity is 100 kg.
How long does the suction cup battery last and how is it charged?
The run time is up to 8 hours, and the battery is charged with a USB-C cable.
How does the suction cup maintain the vacuum during a long installation?
The pump starts automatically when the vacuum drops below the 120 kg level and stops at the 150 kg level.
What are the suction cup’s tapping wedges used for?
The two integrated wedges are used to tap the tile into place during installation.
Does the suction cup work on textured tiles?
Yes, it is suitable for smooth and lightly textured surfaces.
Recycling instructions:
Sort the cardboard packaging into cardboard collection and the plastics into plastic collection. The Edma suction cup 100 kg contains a lithium-ion battery and electronics, so take the device at the end of its life to a collection point for waste electrical and electronic equipment (WEEE).
