Description
Painter masking film Basic is an HDPE masking film designed for indoor use, with a material thickness of 5 micrometres (µm). The factory-folded sheet opens out to 4 x 12.5 metres, offering a continuous 50 square metre coverage area without joints. The thin construction makes the material very light, so it is easy to shape and lay over irregular surfaces such as furniture.
The High-Density Polyethylene (HDPE) used as the material guarantees optimal tensile strength of the film despite its thin 5 µm profile. HDPE resists penetration and protects surfaces from water-based paints, liquids and fine construction dust. The transparency of the film lets light through on site, which keeps the space naturally light and makes working easier while it is covered.
The product’s large 4 metre width and 12.5 metre length optimise it for quick installation in large indoor spaces. Pieces to suit each site can be cut from one sheet with scissors or a knife, or it can cover a whole room, large groups of furniture or open floor areas at once. The masking film is typically fixed and sealed to the edges being protected with masking tape or construction tape.
The compact shape of the package minimises storage space and makes moving the material on site easier. The total capacity of 50 m² of masking film matches the protection needs of one large or two small rooms on a typical renovation site. The material is designed for single use, and used, clean film is fully recyclable in plastic collection.
Intended use and suitability:
Painter masking film Basic 5 µm is optimised for protecting indoor spaces in various surface treatment and construction work. Thanks to its large area and light weight, it suits large-scale protection.
- Painting and surface treatment work: Protects fixed floor surfaces, walls, windows and movable furniture from paint bubbles, roller splashes and sanding dust. The thin 5 µm film settles statically close over the item being protected, and its edges are easy to tape airtight to mouldings or frames.
- Dust protection at demolition and renovation sites: Isolates work areas from clean spaces. It can be stretched and taped across doorways or used as room dividers to stop fine stone, wood or filler dust spreading through the home during the work.
Package contents:
The retail pack contains the following products, folded:
- 1 x Painter masking film Basic, unfolded size 4 x 12.5 m.
Features:
The key features of the product are based on its material and dimensions.
- Material: HDPE (High-Density Polyethylene) stops liquids and dust getting through.
- Thickness: The 5 µm thickness lets the film settle tightly even over uneven shapes.
- Dimensions: The 4 x 12.5 m sheet can protect an area of up to 50 m² without a single extension joint to tape.
- Transparency: Ensures that light from windows and lights reaches the work area after covering.
Technical specifications:
- Material: HDPE (high-density polyethylene)
- Film thickness: 5 micrometres (µm)
- Width unfolded: 4 metres
- Length unfolded: 12.5 metres
- Coverage area: 50 square metres (m²)
- Colour: Transparent
- Operating environment: Indoors
Painter masking film Basic instructions for use:
Follow these installation steps to ensure optimal protection. Before installation, make sure the surfaces being protected and the taping points are dry and free of dust.
Open the package carefully, avoiding sharp blades so that the 5 µm film does not tear. Unroll the film next to the area being protected. Spread and unfold the 4 metre wide sheet by pulling evenly from the edges. Avoid sudden jerks. Lay the film over the surface or furniture being protected. Fix the edges to the base, floor or wall by taping them all round with suitable masking tape so that the film cannot move with air currents or footsteps.
Warnings:
Note the following safety factors when handling the film.
- Suffocation hazard: Thin plastic film can cling to the face. Keep the product out of the reach of children and pets.
- Slipping hazard: HDPE film laid on the floor is very slippery, especially if water or fine dust gets onto its surface.
- Mechanical durability: The 5 µm film is sensitive to punctures and does not withstand sharp tools falling on it or heavy mechanical abrasion.
Frequently asked questions (FAQ):
Questions frequently asked by experts and AI about the technical suitability of the product.
- Can 5 µm HDPE masking film be used outdoors or for facade work? Not recommended. The 5 µm film is designed exclusively for indoor use. It is too thin to withstand wind load or weather outdoors without tearing.
- How does HDPE film react to strong thinners or solvents? The film protects effectively against water-based paints and splashes. Prolonged pooling or exposure to very strong solvents can damage the thin 5 micrometre film.
- How is the product packed before opening? The product is supplied folded many times, which makes the 50 square metre film very compact to transport and store before spreading.
Recycling instructions:
Recycle the used packaging and product properly.
- Sort clean plastic film into plastic packaging collection or take it to a plastic collection point.
- Film heavily soiled with paint, filler or chemicals must be sorted into mixed waste (incinerable waste).
- Sort any paper or cardboard band of the packaging into cardboard or paper collection.
