Skip to content

Schwan paint roller 200 mm + 2 m extension pole

Efficient painting set for large surfaces, for professional use. Contains a wide 200 mm roller and a sturdy 2-metre extension pole for fast, ergonomic painting of walls and ceilings without ladders.

Product number: 625100.18 EAN: 4022307174556 Outer box: 30 Unit: pcs RRP: Brand:

Description

The Schwan paint roller 200 mm + 2 m extension pole is a complete solution for professional, efficient surface treatment. This set is designed especially for painting large areas such as walls and ceilings, where working speed and ergonomics are key. The combination of a wide roller and a long pole significantly reduces physical strain and speeds up the workflow on site.

At the core of the set is a 200 mm wide paint roller that gives wide coverage with every stroke. The roller width is optimised to balance efficiency and control, which makes it a versatile tool for different painting projects. The roller is designed to pick up and release paint evenly, which helps achieve a neat, uniform result on different surfaces.

The 2-metre extension pole included in the pack is an essential accessory that significantly extends the painter’s reach. The pole lets you paint high wall surfaces and ceilings of normal height straight from floor level, which reduces the need for ladders or scaffolding and improves work safety. The sturdy construction of the pole ensures that force is transferred efficiently to the roller even when working at full length, without distracting flexing.


Intended use:

  • Painting interior walls: An excellent tool for fast priming and top-coat painting of large wall surfaces in homes and commercial premises. The 200 mm width speeds up the work, and the extension pole reduces the need for crouching and reaching
  • Painting ceilings: The extension pole makes painting ceilings more ergonomic and safer, as the work can be done from the floor. The long pole allows long, continuous strokes, which makes lap marks less visible and improves the final appearance of the ceiling
  • Priming and painting facades: Suitable for outdoor use, for example for painting the facades or plinths of low buildings where extra reach is needed. The extension pole helps you reach eaves lines without scaffolding
  • Floor coating: Can also be used to apply certain floor paints, varnishes or concrete dust binders while standing up, which saves your back and knees

Package contents:

  • 1 pcs Schwan paint roller (width 200 mm), includes frame and roller sleeve.
  • 1 pcs extension pole (length 2 m).

Features:

  • 200 mm roller width: An optimal width for efficient treatment of large surfaces, giving good coverage and control.
  • 2-metre reach: The fixed 2-metre extension pole lets you paint high areas without aids.
  • Sturdy construction: The extension pole is designed to meet the demands of professional use and give a stable feel even in extreme positions.
  • Ergonomic work: Significantly reduces strain on the back and shoulders, as there is less reaching and crouching.
  • Compatibility: The roller frame and extension pole typically use standard threads or fittings, which allows versatile use of the parts (check the fitting type on the product).

Technical specifications:

  • Roller width: 200 mm
  • Extension pole length: 2000 mm (2 m)
  • Product type: Paint roller set with extension pole
  • Country of origin: Germany (typically for Schwan products)

Instructions for use:

Before you start, make sure the surface to be painted is clean and dry. Fix the paint roller frame firmly to the end of the extension pole; make sure the connection is tight and cannot turn. Use a paint tray or bucket with a grid. Dip the roller in the paint and roll off excess paint against the grid until the roller is evenly loaded but does not drip.

Start painting with steady strokes. When using the extension pole, try to keep a relaxed grip and use your body to support the movement instead of arm strength alone. On walls, paint with W- or M-shaped strokes and fill in the gaps to even out the surface. When painting a ceiling, work in the direction of the light (away from the window) with long strokes. Do not press the roller too hard against the surface, so that paint does not squeeze out from the edges of the roller.


Warnings:

When working with a long extension pole, take particular care with your surroundings. Avoid hitting chandeliers, smoke alarms or other obstacles. If the extension pole is metal (e.g. aluminium), take extreme care when working near power lines or exposed electrical installations because of the risk of electric shock. Always make sure you have a firm footing, especially when using the pole at its full length, so that you do not lose your balance. Wear safety glasses to protect your eyes from paint splashes, especially when painting a ceiling.


Frequently asked questions (FAQ):

Can the roller sleeve be replaced?
Yes, the roller sleeve can be replaced when it is worn out or when you change the type of paint. Check the fitting mechanism (e.g. push-fit) and get a compatible 200 mm replacement sleeve.

Does the extension pole fit other tools?
This depends on the fitting at the end of the pole. Many professional extension poles use a standard thread or a cone fitting, so other compatible tools such as sanding heads or roller frames of different sizes can also be attached to them.

How is the set cleaned?
After water-based paints, wash the roller and frame carefully with warm water and soap. With solvent-based paints, use a suitable thinner. Clean the fittings of the extension pole in particular, so that they do not seize when the paint dries.


Recycling instructions:

The parts of the product must be sorted by material. A metal extension pole (or the metal parts of the pole) can be recycled in metal collection. Plastic parts, such as the roller handle and any plastic parts of the pole, belong in plastic recycling. A worn-out roller sleeve with paint on it is usually mixed waste, as it cannot be cleaned well enough to be recyclable. Check local waste management regulations.


Additional information

Weight 830 g
Dimensions 1200 × 105 × 44 mm
Product number

625100.18

EAN

4022307174556

Outer box

30

Retail packaging

Ei pakkausta

Added to range

2015-09-05

Item name SE

Schwan Målarroller 200 mm + 2 m förlängningsskaft

Item name GB

Schwan Paint Roller 200 mm + 2 m extension pole

Myyntipakkauksen yksikkö

KPL

GPSR

GPSR Dokumentti:

Tuotteen tunnistetiedot (Product Identification):
Tuotenimi: Schwan Maalaustela 200 mm + 2 m jatkovarsi
Tuotetyyppi: Käsityökalu, maalausväline
Alkuperämaa: Saksa (Germany)

Valmistajan tiedot (Manufacturer):
Schwan Werkzeuge GmbH
Papenberger Str. 37
42859 Remscheid
Germany (Saksa)
Sähköposti: info@schwan-werkzeuge.de
Verkkosivusto: www.schwan-werkzeuge.de

EU-maahantuoja / vastuullinen talouden toimija (EU Responsible Person):
Toolcat Oy
1059567-7
Kalustetie 1
01720 Vantaa
Suomi
Sähköposti: asiakaspalvelu@toolcat.fi
Puhelin: +358442703795

Turvallisuustiedot ja varoitukset (Safety Information):
1. Käyttötarkoitus: Tuote on mekaaninen käsityökalu maalien ja pinnoitteiden levittämiseen, koostuen maalaustelasta ja pitkästä jatkovarresta. Käytä vain sille suunniteltuun tarkoitukseen.
2. Sähköiskun vaara: Ole äärimmäisen varovainen työskennellessäsi pitkän jatkovarren kanssa sähkölinjojen, avoimien sähköasennusten tai jännitteisten kohteiden läheisyydessä, erityisesti ulkona tai korkeissa tiloissa. Varren kosketus jännitteiseen osaan voi aiheuttaa hengenvaarallisen sähköiskun.
3. Fyysiset vaarat: Varmista aina tukeva jalansija ja tasapaino työskennellessäsi pitkällä varrella, erityisesti korkealla tai tikkailla seisten. Varo varren osumista ympärillä oleviin ihmisiin tai esineisiin (esim. kattovalaisimet).
4. Suojavarusteet: Käytä suojalaseja suojataksesi silmät maaliroiskeilta, erityisesti pään yläpuolella (kattoja) maalattaessa.
5. Yleinen turvallisuus: Tämä tuote ei ole lelu. Säilytä lasten ulottumattomissa.
6. Hävittäminen: Hävitä tuote ja sen osat paikallisten jätehuoltomääräysten mukaisesti. Kierrätä metalli- ja muoviosat mahdollisuuksien mukaan.

VALMISTAJA

Masonry tools made in Germany, favoured by professionals, at a competitive price.

See the full Schwan range

TUKKUOSTAJALLE

The product is packed in sales units of 30 pcs, so it can be ordered in full boxes.

The order code is 625100.18 and the EAN 4022307174556 — you can search for the product by either, or by scanning the barcode in the search.

Sold-out items can be ordered on backorder: we ship what is in stock straight away and the rest as a separate delivery when the goods arrive at our warehouse.

Prices, stock levels and contract discounts are shown to logged-in business customers. Business customers buy on invoice. Stock items are typically delivered within 48 hours anywhere in Finland. Normal delivery time is 1–5 working days, depending on the shipping method and destination.