Description
The Xcellent fitter’s glove 4131A is a high-quality protective glove designed especially for fitters that combines excellent protection and comfort. This glove offers a balanced combination of protective properties and flexibility, which makes it an ideal choice for tasks that call for precision and sensitivity, but also protection against mechanical risks.
The Xcellent fitter’s glove 4131A is designed to meet the needs of fitters in particular. The glove’s breathable, flexible construction makes it pleasant to wear even for long periods, which improves workers’ efficiency and wellbeing. The glove’s breathable material helps keep hands cool and dry, reducing sweating and the skin problems that come with it. The flexible construction, for its part, allows excellent mobility and dexterity, which is especially important in tasks that call for a precise grip and sense of touch.
The gloves meet the requirements of the EN 388:2016 standard for mechanical protection and give good protection against abrasion, tears and punctures. This makes them suitable for many kinds of tasks, such as installation work, warehouse work and light industrial use.
Features
- Abrasion resistance: 4 (EN 388:2016)
- Cut resistance (Coupe test): 1 (EN 388:2016)
- Tear resistance: 3 (EN 388:2016)
- Puncture resistance: 1 (EN 388:2016)
- Breathability: High, the breathable material adds comfort
- Flexibility: Designed to maximise mobility and dexterity
- Certificates: EN 420:2003 + A1:2009, EN 388:2016
Mechanical protection levels (EN 388)
The Xcellent fitter’s glove 4131A gives balanced protection and comfort that meet the requirements of the EN 388:2016 standard. The table below shows the details of the glove’s mechanical protection levels obtained in laboratory tests under the EN 388:2016 standard.
| Mechanical protection property | Result (EN 388:2016) |
|---|---|
| Abrasion resistance | 4 (min. 0 – max. 4) |
| Cut resistance (Coupe test) | 1 (min. 0 – max. 5) |
| Tear resistance | 3 (min. 0 – max. 4) |
| Puncture resistance | 1 (min. 0 – max. 4) |
| Impact protection (EN 388:2016) | – (Not tested) |
Cut protection levels (EN 388)
Cut-resistant gloves are designed to protect users from different cut risks, and their protection levels are defined under the EN 388:2016 standard. Cut protection is measured on an A-F scale, where F is the highest level of protection.
| Cut protection level | Protection level | Uses |
|---|---|---|
| Level A | Minimal protection | Light tasks, occasional cut risks |
| Level B | Low protection | Tasks where cut risks are minor but regular |
| Level C | Medium protection | Metal handling, glass cutting, industrial work |
| Level D | High protection | Handling sharp objects, heavy industry |
| Level E | Very high protection | Demanding working conditions, constant cut risks |
| Level F | Maximum protection | Extreme conditions, very high cut risks |
The Xcellent fitter’s glove 4131A gives level 1 cut protection, which makes it suitable for tasks where cut risks are minor. This level gives sufficient protection in installation work and other light industrial tasks, for example, where materials are handled with cut risks that exist but are not very high.
Heat protection levels (EN 407)
Heat protection assesses the ability of gloves to protect the user from heat, including direct heat, contact heat and splashes of molten metal. Heat protection levels are measured on a 0-4 scale, where 4 is the highest level of protection.
| Heat protection level | Protection level | Uses |
|---|---|---|
| Level 1 | Basic protection level | Protection at low temperatures, light heat |
| Level 2 | Moderate protection | Occasional contact with hot objects |
| Level 3 | High protection | Regular handling of hot objects, welding |
| Level 4 | Maximum protection | Extreme heat, very hot objects, molten metals |
The Xcellent fitter’s glove 4131A is not designed specifically for managing heat risks, so it does not give heat protection. However, it is an excellent choice for tasks where mechanical protection and comfort are the primary requirements.
Breathability and flexibility
Breathability and flexibility have been given special attention in the design of the Xcellent fitter’s glove 4131A. The glove’s breathable material ensures that hands stay cool and dry all working day, which adds comfort and reduces skin problems caused by sweating. In addition, the glove’s flexible construction allows excellent mobility, which is essential in precision tasks such as installation and assembly work. The gloves fit the hand closely but still give the fingers enough room to move, which improves the precision and speed of the work.
Instructions for use
- Getting started: Check the condition of the gloves before use to make sure they are not damaged.
- Putting the gloves on: Make sure the gloves fit your hands well without squeezing or being too loose.
- During use: Use the gloves for tasks that call for protection against abrasion, tears or punctures.
- Cleaning and care: The gloves can be washed gently with mild soap and water. Let them dry at room temperature. Do not expose the gloves to direct heat.
How to choose the right fitter’s gloves
When choosing fitter’s gloves, it is important to consider both the need for protection and comfort. The Xcellent fitter’s glove 4131A offers a balanced combination of both, which makes it an excellent choice for many installation and assembly tasks. The glove’s high abrasion resistance and flexible construction ensure that it withstands daily wear while giving the necessary dexterity and mobility. This makes the Xcellent fitter’s glove a competitive alternative to other gloves on the market, especially in tasks that call for a precise grip and sensitivity.
Product comparison
The table below compares the Xcellent fitter’s glove 4131A with two well-known glove brands: Ansell HyFlex 11-600 and Showa 370. The table shows the protection levels and breathability of each glove, which helps you see the main differences and strengths of these products.
| Feature | Xcellent fitter’s glove 4131A | Ansell HyFlex 11-600 | Showa 370 |
|---|---|---|---|
| Abrasion resistance (EN 388:2016) | 4 | 3 | 4 |
| Cut resistance (Coupe test, EN 388:2016) | 1 | 1 | 1 |
| Tear resistance (EN 388:2016) | 3 | 2 | 2 |
| Puncture resistance (EN 388:2016) | 1 | 1 | 1 |
| Breathability | High | Medium | High |
| Flexibility | Excellent | Good | Excellent |
Summary:
The Xcellent fitter’s glove 4131A offers an excellent combination of protection, breathability and flexibility, which makes it especially suitable for fitters and other professionals who need precise dexterity. Compared with Ansell HyFlex 11-600 gloves, Xcellent gives better abrasion resistance and breathability, which makes it a competitive alternative, especially in warm and intensive work environments. Compared with Showa 370 gloves, Xcellent gives similar protection levels, but with excellent dexterity and comfort.
Warnings
These gloves are not designed for use with harsh chemicals or high temperatures. Make sure you use the gloves only for the purpose they are designed for.
Frequently asked questions (FAQ)
Can these gloves be used for outdoor work?
The gloves are well suited to outdoor work, but they are not designed specifically for use in damp or very cold conditions.
Are the gloves suitable for precision work?
Yes, the gloves’ flexible, close fit makes them excellent for precision tasks such as installation and assembly work.
