Description
The Yato magnetic socket is a socket for hex-head screws and nuts, designed for screwdrivers and cordless drills. The shank is a 1/4″ (6.3 mm) hex, which fits the most common quick-release chucks and bit holders. There is a magnet in the bottom of the socket that holds the screw in place when you work in a tight space or overhead.
The socket is made of CRV 6150 chrome vanadium steel. The alloy steel withstands the impact-like torque of a screwdriver and keeps the dimensions of the socket recess, so the corners of the nut do not round off with repeated use. The body is 48 mm long, which is enough to reach recessed screws without an extension bar.
Choose the size according to the across-flats size of the hex head: the wrong size rounds off the head and damages the socket recess. The shank and length are the same in all sizes.
The Yato magnetic socket is suitable for fitting roofing screws and wall panels, assembling machines and furniture, servicing vehicles and fixing equipment enclosures, where the screw has to be put in place with one hand.
Intended use and suitability:
The magnetic socket speeds up fixing hex-head screws because you do not need to support the screw with your other hand.
- Metal roofs and facades: fixing roofing screws and wall panels at height, where a dropped screw cannot be recovered.
- Machine and furniture assembly: assembling hex-head screws in series production.
- Vehicle servicing: hose clamps and hex-head screws in tight spots.
- Equipment enclosures: fixing small hex-head screws when the screw is put in place with one hand.
Package contents:
- Yato magnetic socket, selected size, individually packed
Features:
- Magnet in the socket recess: holds the screw in place even when driving upwards.
- 1/4″ hex shank: fits a quick-release chuck, bit holder and screwdriver without an adapter.
- CRV 6150 steel: the chrome vanadium alloy withstands torque and keeps the recess dimensions.
- 48 mm length: reaches a recessed screw without an extension bar.
Technical specifications:
- Shank: 1/4″ (6.3 mm) hex.
- Shank type: hex.
- Length: 48 mm.
- Material: CRV 6150.
- Magnet: yes.
Yato magnetic socket instructions for use:
Choosing the size: Measure the across-flats size of the hex head and choose the matching socket (8, 10 or 13 mm). The socket should fit on the head without play.
Fitting to the tool: Push the 1/4″ shank into the quick-release chuck or bit holder until it locks. Check by pulling that the socket does not come out.
Driving: Put the screw in the socket: the magnet holds it in place. Bring the screw into position, start at a low speed and keep the socket straight in line with the screw axis. Stop tightening when the screw is fully home.
Maintenance: Clean swarf and dust out of the socket recess, as they weaken the magnet’s hold. Store dry and away from strong magnets.
Warnings:
- Always use the size that matches the screw head: the wrong size rounds off the head and breaks the socket.
- Do not exceed the torque the tool or socket can withstand; an impact driver needs a socket designed for it.
- Check the socket for cracks and wear; do not use a damaged socket.
- Wear safety glasses: a breaking socket or screw can be thrown out.
- The magnet can interfere with pacemakers and other sensitive devices; keep it away from them.
- Keep out of the reach of children.
Frequently asked questions (FAQ):
Which sizes are in the Yato magnetic socket range? The key sizes are 8 mm, 10 mm and 13 mm; the shank and 48 mm length are the same for all.
What is the shank size of the socket? The shank is a 1/4″ (6.3 mm) hex, which fits the most common screwdrivers and cordless drills.
What is the magnet for? The magnet holds the screw in the socket, so you can put the screw in place with one hand and it does not fall out when working overhead.
What material is the socket made of? CRV 6150 chrome vanadium steel.
Is the socket suitable for an impact driver? The socket is intended for screwdrivers and cordless drills; for an impact driver, choose a socket rated for impact use.
Recycling instructions:
A Yato magnetic socket at the end of its life is steel and contains a permanent magnet. Take the socket to metal recycling; the magnet goes for recycling with the metal. Sort the cardboard and plastic packaging into their own collections according to local rules.
