Description
This spare roller made of nylon fibres is designed specifically for use with the Edma EDMAROLLER CORNER corner roller. It is a special tool for fast, easy and uniform application of filler (joint compound) to internal corners. The roller’s nylon fibres ensure the compound is distributed homogeneously on the surfaces, which makes the work more efficient and reduces material waste compared with traditional methods.
The spare roller is designed to withstand professional use in demanding environments when finishing walls, ceilings and plasterboard joints. It absorbs and releases filler efficiently, which allows an even, full-coverage layer in one pass. This property is especially useful when taping and filling internal corners, where an even surface is critical to the end result.
Easy cleaning is a central part of this spare roller’s design. The roller is easy to clean with water straight after use, which extends its service life. The product weighs only 0.080 kg, which makes it light to handle and change. Having a spare roller ensures the work can continue without interruption when the original roller needs cleaning or is worn out.
Intended use:
The product is optimised for the following uses:
- Filling internal corners: Applying filler to 90 degree internal corners before fixing joint tape or the final finishing of the corner.
- Plasterboard joint tapes: Applying compound to corners in plasterboard construction for embedding joint tapes (paper or fibreglass).
- Finishing ceiling lines: Applying compound to the corners between wall and ceiling.
Package contents:
- 1 x Spare roller for the Edma EDMAROLLER CORNER corner roller
Features:
- Special design: Designed specifically for efficient work on internal corners together with the Edma EDMAROLLER CORNER corner roller.
- Nylon fibres: Guarantee homogeneous, even spreading of the filler on the surface.
- Speed: Speeds up the first stage of filling work by covering a large area quickly.
- Easy cleaning: Can be cleaned with water and soap, which keeps the fibres in good condition.
- Fitting: 8 mm push-in roller
- Light: The 80 gram weight makes handling and changing effortless.
Technical specifications:
- Weight: 0.080 kg.
- Fibre material: Nylon.
- Compatibility: Edma EDMAROLLER CORNER corner roller
Spare roller for the Edma EDMAROLLER CORNER corner roller instructions for use:
Follow these instructions to achieve the best result and extend the life of the product.
Before first use: Wash the spare roller thoroughly with soapy water. This step is essential to prevent any loose fibres getting into the filler the first time you use it.
Before each use: Dampen the spare roller lightly with water before starting work. A damp roller absorbs and spreads the compound more evenly.
Changing the spare roller: Remove the worn or dirty roller from the push-in frame of the Edma EDMAROLLER CORNER corner roller. Fit the new spare roller on the frame and make sure it is firmly in place.
After use: Clean the spare roller immediately after use with water and a mild detergent. Do not let filler dry into the roller fibres. Make sure the spare roller is completely dry before storing it.
Warnings:
- Always use suitable personal protective equipment, such as safety glasses and gloves, when handling fillers.
- Do not expose the spare roller to strong solvents, which can damage the nylon fibres.
- Store the spare roller in a dry place out of direct sunlight.
Frequently asked questions (FAQ):
- Does this spare roller fit other corner rollers?
This spare roller is designed specifically for use with the Edma EDMAROLLER CORNER corner roller. It can be used with other short 8 mm push-in rollers - How do I stop fibres coming loose?
It is very important to wash the spare roller with soapy water before first use, as described in the instructions. - Can the spare roller be used with ready-mixed fillers?
Yes, the nylon fibres are well suited to applying various fillers and putties.
Recycling instructions:
Dispose of the product and its packaging according to local waste management regulations.
- Spare roller: The product contains plastic and fibre. It should be disposed of as mixed waste or energy waste according to local waste management regulations.
- Packaging: Recycle the packaging materials as plastic.
