Description
The Flo metal leaf rake is designed for efficient maintenance of gardens and green areas. The rake is made of flexible A3 steel strips, which makes it both light to handle and durable in use. Thanks to its construction, the tines follow the ground, collecting debris effectively without damaging the lawn underneath. This product is supplied without a handle and is designed to be fitted to a standard 24 mm diameter handle.
The 425 mm working width of the rake allows even large areas to be raked quickly. The head consists of 22 flat tines, whose close spacing ensures that even smaller leaves, grass clippings and other loose debris are picked up in one stroke. The metal construction gives a long life compared with plastic alternatives, especially in more demanding conditions or when handling heavier material such as wet leaves.
This rake head is an optimal solution for property maintenance professionals and those maintaining public spaces who need a reliable tool for regular tidying. Its open construction effectively stops debris getting stuck between the tines, which makes work smoother. The product is easy to store and transport thanks to the removable handle.
Intended use:
This leaf rake head is intended for a wide range of outdoor tidying. Its main uses are:
- Lawn care: Removing grass clippings and dead grass from lawns without damaging healthy grass.
- Collecting leaves: Efficient raking of autumn leaves and needles from yards, parks and walkways.
- General garden work: Collecting weeds and other loose debris from the edges of flower beds and gravel paths.
Package contents:
- 1 pc Flo leaf rake head, metal, 425 mm (without handle)
Features:
- Material: Made of flexible A3 steel sheet, which returns to its shape after stress and withstands wear.
- Optimal working width: The 425 mm width (42.5 cm) gives a good balance between efficiency and handling, even in tight spots.
- Close tine spacing: 22 flat tines guarantee an accurate raking result and pick up even fine material.
- Handle fixing: A standardised fixing point compatible with the most common wooden or composite handles with a 24 mm diameter.
- Light construction: Despite the metal material, the construction has been kept light, which reduces strain on the user during long periods of work.
Technical specifications:
- Type: Leaf rake / garden rake
- Working width: 425 mm (42.5 cm)
- Material: A3 steel
- Number of tines: 22 pcs
- Compatible handle size: 24 mm
- Supplied as: Head only (no handle)
Instructions for use:
Installation: Fix the rake head firmly to a 24 mm diameter handle (not included). Make sure the handle is pushed all the way into the head fitting and tighten any fixing screws or use a wedge to make sure the joint is secure before starting work.
Use: Use the rake with pulling movements to gather leaves and debris into piles. The flexible tines are designed to follow the ground; avoid pressing too hard against the ground so that the tines do not bend permanently. The product is best suited for raking dry or slightly damp material.
Maintenance: Clean loose dirt and moisture off the head after use to prevent corrosion. Store the rake in a dry place, preferably hanging up, so that the tines are not damaged.
Warnings:
- Always make sure before use that the head is firmly attached to the handle. A loose joint can create a hazardous situation.
- The metal tines of the rake can be sharp. Handle with care and wear protective gloves during installation and cleaning.
- Do not use the product for moving heavy soil materials such as stones or earth, as this can damage the tines.
Frequently asked questions (FAQ):
Does the pack include a handle?
No, this product contains only the rake head. The handle must be bought separately.
What size of handle fits this head?
The rake head is designed to be attached to a handle with a diameter of 24 mm.
Does the rake rust?
The rake is made of steel. Although the material is durable, we recommend cleaning and drying the rake after use to prevent corrosion.
Recycling instructions:
The product is made mainly of metal (steel). At the end of its life, the rake head should be taken to an appropriate metal recycling point. Check local recycling regulations.
