Description
The Kapro Optivision tape measure (510) is intended for accurate length measurement in installation, construction and furniture work. The Optivision scale uses high-contrast colouring that makes the millimetre and centimetre divisions stand out clearly even in changing light. Double-sided markings let you read the tape from above and below, which speeds up measuring in confined spaces and when measuring from edges.
The body is shaped to fit the hand and has grip surfaces for a controlled hold. The lock button puts you in control of the tape length: the tape stays at the point you want for marking or fitting, and releasing it brings the tape back into the case in a controlled way. The movement of the end hook compensates for inside and outside measurements, so the thickness of the hook is automatically taken into account in the result.
The tape blade is steel and has a clear millimetre and centimetre scale. The double-sided print supports measuring where the viewing angle varies or the measuring level is above or below your head. The tape measure clips easily onto a belt with the integrated clip, and the wrist strap makes it easier to handle on scaffolding and ladders.
The core of the Optivision solution is readability: the contrast between dark and light colours highlights the main divisions and helps you pick out the point being measured quickly. This reduces the need to move your eyes from the edge of the tape to the marking point and supports repeatable results as measuring situations change.
Applications include board and frame measurements, furniture and trim dimensioning, pipe and duct runs, positioning electrical fittings and fixings, and general length measurements indoors and outdoors. The double-sided scale helps especially when measuring from an edge, when the tape runs on the shaded side of a structure or visibility is limited.
Intended use:
- Construction and installation measurements: Frame dimensioning, opening sizes, lengths of worktops and trims, and aligning appliances and furniture. Double-sided markings save time, as you can take the reading from either side without twisting the tape. The lock makes it easier to mark the measuring point at the exact spot, and the end hook supports both inside and outside measurements without manual corrections.
- Electrical and plumbing/HVAC contracts: Spacing sockets and trunking, routing pipes and ducts, and distances between components. The contrast of the Optivision scale makes the numbering stand out better in dim spaces, and the belt clip and wrist strap make it easier to carry the tape measure between several jobs.
- Woodwork and furniture work: Cutting pieces to length, fitting dimensions and repeat measurements in the workshop and on site. The double-sided scale makes reading easier even when the piece overhangs the bench or the measurement is taken from the back edge of the piece. The lock and controlled return reduce the need to keep the tape constantly tensioned.
- Interior fitting and finishing: Picture rails, curtain poles, railings and cover strips. Edge measurements and height differences are easy to read without turning the tape, and the wrist strap makes working from ladders easier.
Package contents:
- Kapro Optivision tape measure (510)
- Wrist strap
- Belt clip integrated into the body
Features:
- Optivision scale: High-contrast print highlights the main divisions and makes reading easier in changing light.
- Double-sided markings: Scale on both sides of the tape, so the reading is visible in both upward and downward measurements.
- Locking mechanism: Stops the tape at the selected length, making marking and repeat measurements easier.
- End hook movement: Compensates for the hook thickness, giving inside and outside measurements without manual correction.
- Steel tape: Millimetre and centimetre divisions, suitable for accurate length measurements.
- Ergonomic body and grip surfaces: A more secure grip, easy to handle with one hand on site.
- Belt clip and wrist strap: Quick carrying and a secure hold when working on scaffolding.
- Clear numbers and main divisions: Quick to take in, reducing misreadings in repeated measurements.
Kapro Optivision tape measure instructions for use:
- Preparation: Make sure the edge of the tape is clean and there is no dirt on the tape surface that could affect the reading. Check the movement of the end hook and make sure it moves easily.
- Starting a measurement: Hook the end hook onto the edge of the piece or the opposite surface. Pull the tape out to the length you want and press the lock down. Hold the case with a steady grip.
- Reading: Read the measurement on the Optivision scale directly at the measuring point. Use the double-sided markings where the viewing angle is restricted or the measurement is taken from the shaded side of a structure.
- Marking: Keep the lock engaged and mark the measuring point. Make sure the tape stays straight against the piece.
- Returning the tape: Release the lock in a controlled way. Let the tape wind back while keeping a finger lightly near the edge, so the return is controlled.
- Repeatability: Repeat the measurement if necessary and make sure the end hook is attached the same way each time.
- Maintenance: Clean the tape and case with a soft cloth. Avoid solvents or abrasives. Store in a dry place and avoid long-term bending, which can change the shape of the tape.
Warnings:
- Take care not to trap your fingers between the tape and the body as the tape returns.
- Risk of cuts: the edge of the tape can be sharp, so handle it with care.
- Do not let the tape return into the case uncontrolled.
- Do not use near live conductors without suitable precautions.
- Keep out of the reach of children.
Frequently asked questions (FAQ):
What is the advantage of the Optivision scale?
The contrasting print and clear main divisions speed up reading and reduce misinterpretation.
Why are double-sided markings useful?
The reading can be taken from both sides, which makes measuring easier in tight spots and from edges.
Can the movement of the end hook change the measurement?
The movement of the end hook is designed to compensate for the hook thickness, so that inside and outside measurements match the actual length.
How is the tape maintained?
Clean the tape regularly and avoid solvents. Store it dry and protect it from knocks.
Are the belt clip and wrist strap included?
Yes, the tape measure has a belt clip and a wrist strap for convenient use.
Recycling instructions:
- Packaging: Sort plastic parts into plastic collection.
- Product: Dispose of the product as mixed waste.
