Description
Laatu fitter’s glove 2121X is an installation and general-purpose work glove classified under EN 388:2016 with a mechanical protection rating of 2121X: abrasion resistance level 2, cut resistance (Coup test) level 1, tear resistance level 2 and puncture resistance level 1. The glove is designed for work that needs a secure grip on both dry and wet items and a soft, flexible glove for long shifts.
The body of the glove is a 13 gauge seamless polyester-elastane knit that is flexible and breathable. The knit follows the hand and keeps fingertip feel when handling screws, connectors and tools. The seamless construction reduces chafing points and adds comfort.
The coating is latex with a microfoam structure (microfoam sandy), and its surface has a rough pineapple-pattern grip surface. The rough microfoam surface adds friction and gives grip even on wet and slippery items. The coating extends from the fingertips over the palm to the back of the hand, and only the flexible cuff is uncoated knit.
The coated palm is waterproof, so the Laatu fitter’s glove 2121X is suitable for both dry and wet working conditions. The glove is black and available in several sizes; choose the right size from the size chart.
Laatu fitter’s glove 2121X, intended use and suitability:
The Laatu fitter’s glove 2121X belongs to Laatuhanska’s soft grip gloves: it suits work where a secure grip and comfort matter more than cut protection. For dry precision work, choose the Laatu fitter’s glove 4131X breathable and flexible, for work with a high cut risk the Laatu cut-resistant glove 4343FX Cut Super and for touchscreen use the Laatu general-purpose glove 4121X.
- Installation and assembly work: Handling screws, connectors and components, where the 13 gauge knit keeps fingertip feel and the pineapple-pattern coating holds the grip.
- Construction and outdoor work: Handling general cargo, formwork, boards and pipes, where the waterproof palm keeps the hand dry in rain and on damp surfaces.
- Logistics and warehouse work: Handling packages, boxes and general cargo, where a secure grip and a light glove are needed.
- Maintenance and property management: Handling wet and dirty parts, where the rough surface of the coating stops the item from slipping.
- Garden and yard work: Watering, planting and cleaning work where the glove is exposed to moisture.
Package contents:
- Laatu fitter’s glove latex ultra soft sandy grip, 1 pair
Laatu fitter’s glove 2121X features:
- Waterproof coated palm: The latex microfoam keeps water out of the palm area and keeps the hand dry in wet work.
- Pineapple-pattern grip surface: The rough pattern adds friction and gives a secure grip on wet and smooth items.
- 13 gauge seamless knit: Flexible and breathable polyester-elastane body without chafing seams.
- Soft microfoam structure: The foamed latex flexes with the hand and reduces hand fatigue during long shifts.
- Wide coating area: The coating extends from the fingertips to the back of the hand and protects the knit from wear.
- Flexible cuff: The knitted cuff keeps the glove in place and stops debris getting inside the glove.
- Several sizes: Available in several sizes from small to extra large.
Technical specifications:
- Product: Laatu fitter’s glove latex ultra soft sandy grip (Laatuhanska ARMOR Ultra Soft Sandy Grip, model 3020).
- Standard: EN 388:2016.
- Protection rating: 2121X (abrasion 2, cut Coup 1, tear 2, puncture 1, cut ISO 13997 not tested).
- Knit gauge: 13 gauge, seamless.
- Body material: Polyester, elastane.
- Coating: Latex microfoam, rough pineapple-pattern grip surface; fingers, palm and back of hand.
- Waterproofing: The coated palm is waterproof.
- Colour: Black, yellow cuff edge.
- CE marking: Yes.
Laatu fitter’s glove 2121X instructions for use:
Inspect the glove visually before each use. Do not use the glove if the knit has holes or the coating has cracked or come off. Choose a size that fits closely without squeezing; a glove that is too large reduces fingertip feel and one that is too small tires the hand.
Put the glove on a dry hand and pull the cuff over the wrist. After use, remove loose dirt by shaking or rinsing and let the glove dry at room temperature; do not dry it on a radiator or in direct sunlight, because heat ages the latex. Store dry and protected from light. Replace the glove when the coating is worn through or the knit is damaged.
Warnings:
- No protection against fire or heat: The glove is a mechanical protective glove (EN 388). It is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Do not use the glove for welding, hot work, grilling or handling hot objects; the polyester knit and latex coating can melt or ignite and cause burns.
- Natural rubber latex and allergies: The coating contains natural rubber latex, which can cause an allergic reaction in people sensitised to it. Stop using the glove and seek treatment if needed if the skin shows redness, itching or swelling.
- Only minor cut protection: Cut resistance level 1 (Coup), and ISO 13997 cut resistance has not been tested. The glove is not suitable for handling sharp edges, glass, sheet metal or blades; use a cut-resistant glove for these.
- No protection against rotating machine parts: Do not use the glove near rotating blades or machine parts because of the risk of entanglement.
- No chemical protection: The glove is not EN ISO 374 classified. A waterproof coating does not mean chemical tightness, and the glove must not be used for handling chemicals.
- Damaged glove: A hole or detached coating removes the protection; dispose of a damaged glove.
Frequently asked questions (FAQ):
What does the EN 388:2016 rating 2121X mean on a fitter’s glove?
The numbers and the letter give the test results in order: abrasion resistance 2 (scale 1–4), cut resistance in the Coup test 1 (1–5), tear resistance 2 (1–4), puncture resistance 1 (1–4), and X means that ISO 13997 cut resistance has not been tested.
Is the Laatu fitter’s glove 2121X waterproof?
The coated palm is waterproof, so water does not pass through the coated area. The uncoated cuff is not waterproof, and the glove is not intended for prolonged immersion in water.
What does a microfoam sandy coating mean?
The coating is foamed latex with a surface roughened to a sand-like texture. The porous, rough surface adds friction on wet and smooth surfaces and stays flexible at the same time.
Is the glove suitable for people with a latex allergy?
No. The coating is natural rubber latex, so people sensitised to latex should choose a glove with a nitrile or polyurethane coating.
Is the Laatu fitter’s glove 2121X a cut-resistant glove?
No. The cut resistance is level 1, so the glove is intended for installation and general work. For cut risks, choose the Laatu cut-resistant glove 4343FX Cut Super.
Recycling instructions:
- Glove: The glove is a combination of polyester, elastane and latex coating, and it goes to mixed waste or energy waste according to local waste management instructions.
- Packaging: Sort the hanger card into cardboard collection and any plastic bag into plastic collection.
