Description
The Laatu cut-resistant glove 4343FX Cut Super is a cut-resistant glove classified under the EN 388:2016 standard with a protection rating of 4343FX: abrasion resistance level 4, cut resistance (Coup test) level 3, tear resistance level 4, puncture resistance level 3 and cut resistance level F under the ISO 13997 method, which is the highest cut protection class of the standard. The Laatu cut-resistant glove 4343FX is designed for work that involves handling sharp edges, sheet metal, glass or blades and also needs good fingertip feel.
The body of the glove is a thin 15 gauge knit made of HPPE (high-molecular-weight polyethylene), nylon, fibreglass and elastane. The HPPE and fibreglass yarns provide the cut resistance, and the nylon and elastane give the knit flexibility and fit. The thin knit is breathable and keeps fingertip feel in assembly and handling work that requires precision.
The palm and fingertips are coated with a nitrile foam coating. The foam structure absorbs oil and moisture and channels them away from the contact surface, so the grip stays secure in both wet and dry conditions. The back of the hand is uncoated, which adds ventilation and reduces sweating during long shifts.
The thumb crotch is reinforced, because it is the part of the glove that wears fastest when gripping and pulling objects. The reinforcement extends the life of the glove and keeps the cut protection intact between the palm and thumb.
Laatu cut-resistant glove 4343FX, intended use and suitability:
The Laatu cut-resistant glove 4343FX Cut Super suits tasks in industry and construction where the cut risk is high but the work requires dexterity. For lighter installation and assembly work without a cut risk, the same range offers the Laatu general-purpose glove 4121X and the Laatu fitter’s glove 3121X.
- Sheet metal and metal work: Handling sheets, profiles and cut edges, where class F cut resistance protects against sharp edges and the nitrile foam holds the grip on oily items.
- Handling glass and fibreglass: Lifting and installing glass panes, window units and composite parts, where both cut protection and precise fingertip feel are needed.
- Assembly and servicing: Handling blades, tools and small parts, where the 15 gauge knit lets you grip and fasten small components.
- Logistics and packing work: Opening cardboard with a snap-off blade knife, cutting straps and unpacking, where cuts are the most common cause of hand injuries.
- Construction and demolition work: Handling roofing sheets, fasteners and steel structures in wet and dry conditions.
Package contents:
- Laatu cut-resistant glove 4343FX Cut Super, 1 pair
Laatu cut-resistant glove 4343FX features:
- Class F cut protection: The highest EN 388:2016 (ISO 13997) cut resistance class, intended for work with a high cut risk.
- 15 gauge knit: A thin, breathable construction that keeps fingertip feel and reduces hand fatigue.
- Nitrile foam coating: The palm coating gives a secure grip on wet and dry objects.
- Reinforced thumb crotch: Adds durability at the most worn point of the glove.
- Materials: HPPE, nylon, fibreglass, elastane and nitrile foam.
- Several sizes: Available in several sizes from small to extra large; choose the right size from the size chart.
Technical specifications:
- Product: Laatu cut-resistant glove 4343FX Cut Super (Laatuhanska CutSuper, model 5006).
- Standard: EN 388:2016.
- Protection rating: 4343FX (abrasion 4, cut Coup 3, tear 4, puncture 3, cut ISO 13997 level F, impact protection not tested).
- Knit gauge: 15 gauge.
- Body material: HPPE, nylon, fibreglass, elastane.
- Coating: Nitrile foam, coated palm.
- Reinforcement: Thumb crotch.
- CE marking: Yes.
Laatu cut-resistant glove 4343FX Cut Super instructions for use:
Inspect the glove visually before each use. Do not use the glove if the knit has holes or unravelled areas or the coating has come off, because damage weakens the cut protection. Choose a size that fits closely without squeezing; a glove that is too large weakens the grip and one that is too small tires the hand.
Put the glove on a dry hand and pull the cuff fully over the wrist. After use, remove loose dirt by shaking or brushing. Store the gloves dry, protected from light, at room temperature. Replace the glove when the coating is worn through or the knit is damaged.
Warnings:
- No protection against fire or heat: The glove is a mechanical cut-resistant glove (EN 388). It is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Although the glove looks highly protective, do not use it for welding, hot work, grilling or handling hot objects; the HPPE knit and nitrile coating can melt and cause burns.
- No protection against rotating blades: A cut-resistant glove does not protect against injuries caused by powered saws, grinding discs or rotating blades. Do not use the glove near rotating machine parts because of the risk of entanglement.
- No puncture protection against needles: EN 388 puncture resistance level 3 refers to a blunt test point; the glove does not protect against thin needles or spikes.
- No chemical protection: The glove is not EN ISO 374 classified. It must not be used for handling chemicals.
- Damaged glove: A hole, cut or unravelled knit removes the protection; dispose of a damaged glove.
Frequently asked questions (FAQ):
What does the EN 388:2016 rating 4343FX mean on a cut-resistant glove?
The numbers and letters give the test results in order: abrasion resistance 4 (scale 1–4), cut resistance in the Coup test 3 (1–5), tear resistance 4 (1–4), puncture resistance 3 (1–4), cut resistance in the ISO 13997 test F (A–F, F highest), and X means that impact protection has not been tested.
Is the Laatu cut-resistant glove 4343FX Cut Super suitable for wet and oily work?
Yes. The nitrile foam coating on the palm is designed to hold the grip on both wet and dry objects, and it also works on oily surfaces.
Can a 15 gauge cut-resistant glove be used for assembly work that requires precision?
Yes. A 15 gauge knit is thinner than in ordinary 13 gauge cut-resistant gloves, so fingertip feel is kept when handling small parts and screws.
Recycling instructions:
- Glove: The Laatu cut-resistant glove 4343FX is a combination of textile and nitrile coating, and it goes to mixed waste or energy waste according to local waste management instructions.
- Packaging: Sort the cardboard box and card into cardboard collection and any plastic bag into plastic collection.
