Description
The Laatu fitter’s glove winter 1015W is a lined leather and fabric glove with CE classification Cat I and it meets the basic requirements of the EN 420 standard. The glove is intended for installation and handling work in the cold season that needs the grip of a leather palm, the thermal insulation of a fleece lining and good fingertip feel without a separate mechanical protection requirement.
The palm and the gripping surface of the fingers are smooth sheepskin leather. Sheepskin is thin and soft compared with cowhide, so it adapts to the hand quickly and does not need a long breaking-in period. The smooth leather surface gives an even grip on metal parts, tools and general cargo, and it wears more slowly than a fabric palm alone.
The back of the hand is Britex fabric that is flexible and breathable. The fabric back lets moisture out from inside the glove and makes the glove lighter than an all-leather construction. The combined construction puts the durable material where the wear is and the breathable material on the back of the hand.
Inside is a fleece lining covering the whole glove, which insulates as a thin layer. A thin lining keeps fingertip feel better than a thick pile lining, so handling small parts and fasteners is possible even in the cold. The Laatu fitter’s glove winter 1015W is a variable product available in several sizes; choose the right size from the size chart.
Laatu fitter’s glove winter 1015W, intended use and suitability:
The Laatu fitter’s glove winter 1015W is a low-risk protective glove (Cat I) intended for various installation tasks in cold conditions. The glove suits work where thermal insulation and the grip of a leather palm matter more than a mechanical protection rating. When the work involves abrasion or impacts, use a mechanically rated glove such as the Laatu fitter’s glove 4131X, and for cut risks a cut-resistant glove such as the Laatu cut-resistant glove 3231CX Cut Light.
- Installation and assembly work in the cold: Handling fasteners, profiles and components, where the thin fleece lining keeps fingertip feel and the leather palm holds the grip.
- Construction work in winter: Moving building supplies, steel parts and formwork, where the sheepskin palm withstands wear better than fabric.
- Maintenance and property management: Equipment maintenance, care of outdoor areas and repair work in cool and cold conditions.
- Logistics and outdoor storage: Handling pallets and boxes in a cold warehouse and outdoors, where the fabric back keeps the glove breathable.
- Agriculture and forestry: Handling equipment, fences and loads, where warmth and a precise grip are needed at the same time.
Package contents:
- Laatu fitter’s glove winter leather with fleece lining, 1 pair
Laatu fitter’s glove winter 1015W features:
- Smooth sheepskin palm: The thin, soft leather gives an even grip and withstands wear in the palm area.
- Britex fabric back: The flexible, breathable back lets moisture out and makes the construction lighter than an all-leather glove.
- Fleece lining: The thin lining covering the whole glove insulates and keeps fingertip feel.
- Soft feel: Sheepskin adapts to the hand straight away and does not need a long breaking-in period.
- Flexible construction: The fabric back and thin leather allow hand movements without tightness.
- Suitable for installation tasks: The construction is aimed at installation and handling work in the cold season.
- Wide size range: Available in several sizes, so the fit can be chosen to suit the wearer.
Technical specifications:
- Product: Laatu fitter’s glove winter leather with fleece lining (manufacturer’s product name Laatuhanska Soft Secure Talvi, model 1015W).
- CE classification: Cat I, EN 420.
- Protection class: Low-risk personal protective equipment; an EN 388 mechanical protection rating and an EN 511 cold protection rating are not part of this classification.
- Palm material: Sheepskin leather, smooth surface.
- Back of hand material: Britex fabric.
- Lining: Fleece, covering the whole glove.
- Construction: Combined construction, flexible and breathable.
- Sizes: Available in several sizes (see variations).
- CE marking: Yes.
Laatu fitter’s glove winter 1015W instructions for use:
Inspect the glove visually before each use. Do not use the glove if the leather is torn, seams have opened or the lining has come loose. Choose a size that fits closely without squeezing: a glove that is too tight restricts blood circulation and so also reduces thermal insulation, and one that is too loose weakens the grip.
Put the glove on a dry hand. Sheepskin adapts to the shape of the hand during the first few uses. In cold conditions the thermal insulation depends on a dry fleece lining, so change a wet glove for a dry one. After use, brush off loose dirt and let the glove dry at room temperature; do not dry a leather glove on a radiator or near an open fire, because leather hardens and cracks if it dries too fast. Store dry and protected from light. Replace the glove when the leather is worn through or the lining has compressed.
Warnings:
- No protection against fire or heat: The Laatu fitter’s glove winter 1015W is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Do not use the glove for welding, hot work, grilling or handling hot objects; the fabric back and fleece lining can melt and cause burns.
- No mechanical protection rating: The glove is a Cat I protective glove that is not EN 388 tested. The glove does not protect against abrasion, cuts, punctures or impacts; for handling sharp objects, glass, sheet metal and blades, use an EN 388 classified glove.
- No cold protection rating: The glove has not been EN 511 tested, so there are no numerical limits under the standard for its cold protection. During prolonged work in freezing temperatures, take breaks and warm your hands.
- Not waterproof: Leather and fabric let water through. The glove is not suitable for wet work, and a wet lining loses its thermal insulation.
- No chemical protection: The glove is not EN ISO 374 classified and must not be used for handling chemicals, solvents or oils; leather absorbs oils and solvents.
- No protection against rotating machine parts: Do not use the glove near rotating blades or machine parts because of the risk of entanglement.
Frequently asked questions (FAQ):
What do the CE classification Cat I and EN 420 mean for the Laatu fitter’s glove winter 1015W?
Cat I is the class under the PPE Regulation for equipment that protects against minimal risks. EN 420 is the general standard for protective gloves, setting requirements for sizing, dexterity, harmlessness of materials and markings, among other things. Cat I classification does not include testing for mechanical protection (EN 388) or cold protection (EN 511).
Why is the palm sheepskin and the back fabric?
Wear is concentrated on the palm and the gripping surface of the fingers, so a durable, grippy leather has been chosen for them. The back of the hand does not wear in the same way, so a lighter, breathable fabric that lets moisture out from inside the glove suits it.
Does the Laatu fitter’s glove winter 1015W withstand wet conditions?
No. Sheepskin and Britex fabric let water through, so the glove is intended for dry and snowy conditions. For wet work, choose a winter glove with a waterproof coating or a synthetic outer surface.
Is a fleece lining enough for work in freezing temperatures?
A fleece lining is a thin type of lining that insulates and keeps fingertip feel. Severe frost and prolonged stationary work require a thicker pile or microfibre insulation; for mobile installation work a thin lining is usually the better choice, because it does not weaken the grip.
What is the difference between sheepskin and cowhide in a work glove?
Sheepskin is thinner and softer, so it gives better fingertip feel and adapts to the hand faster. Cowhide is thicker and withstands more abrasion and heat, but it needs a longer breaking-in period and reduces feel. For indoor work that needs a thin grip, a coated knitted glove is also suitable, for example the Laatu general-purpose glove 4121X.
Recycling instructions:
- Glove: The Laatu fitter’s glove winter 1015W is a combination of sheepskin, fabric and fleece lining that cannot be separated by material. Put the glove in mixed waste or energy waste according to local waste management instructions.
- Packaging: Sort the hanger card into cardboard collection and any plastic bag into plastic collection.
