Description
The Laatu cut-resistant glove 3231CX Cut Light is a thin cut-resistant glove classified under the EN 388:2016 standard with a protection rating of 3231CX: abrasion resistance level 3, cut resistance (Coup test) level 2, tear resistance level 3, puncture resistance level 1 and cut resistance level C under the ISO 13997 method (cutting force at least 10 N). The Laatu cut-resistant glove 3231CX is intended for work that needs cut protection together with the fingertip feel of a thin glove.
The body of the glove is an 18 gauge seamless knit made of HPPE (high-molecular-weight polyethylene) and fibreglass. An 18 gauge knit is thinner than in ordinary 13 or 15 gauge cut-resistant gloves, so the glove fits closely and keeps fingertip feel when handling small parts and blades. The seamless construction reduces chafing points.
The palm and fingertips are coated with polyurethane (PU). The thin PU coating gives a secure grip on dry objects and keeps tactile sensitivity good, and it withstands abrasion better than uncoated knit. The back of the hand is uncoated and breathable.
The knit is low-linting, so the glove is also suitable for work where fibres must not be left on the product, such as assembly, packing and electronics work. The Laatu cut-resistant glove 3231CX is very soft and light, and it is available in several sizes.
Laatu cut-resistant glove 3231CX, intended use and suitability:
The Laatu Cut Light is Laatuhanska’s lightest cut-resistant glove: it suits work where the cut risk is moderate and precision is important. For work with a high cut risk, choose the Laatu cut-resistant glove 4343FX Cut Super, and for work without a cut risk the Laatu general-purpose glove 4121X.
- Assembly and precision work: Handling small parts, screws and connectors, where the 18 gauge knit and thin PU coating keep fingertip feel and class C cut resistance protects against sharp edges.
- Packing and logistics work: Opening cardboard with a snap-off blade knife, cutting straps and unloading pallets, where cuts are the most common cause of hand injuries.
- Electronics and equipment installation: The low-linting knit leaves no fibres on components, and the PU coating gives grip on smooth surfaces.
- Thin sheet and profile work: Handling light sheet metal parts, trims and aluminium profiles, where the edges are sharp but the weights are small.
- Handling glass and ceramic products: Packing and sorting light glass and ceramic parts in dry conditions.
Package contents:
- Laatu cut-resistant glove 3231CX Cut Light, 1 pair
Laatu cut-resistant glove 3231CX features:
- Class C cut protection: EN 388:2016 (ISO 13997) cut resistance class C, intended for work with a moderate cut risk.
- 18 gauge seamless knit: An extra thin HPPE and fibreglass body that fits closely and keeps fingertip feel.
- PU coating: The thin polyurethane coating on the palm and fingertips gives a secure grip on dry objects and adds abrasion resistance.
- Low-linting construction: Suitable for work where fibres must not come loose onto the product.
- Soft and light: The thin construction reduces hand fatigue during long shifts.
- Materials: HPPE, fibreglass and polyurethane.
- Several sizes: Available in several sizes from small to extra large; choose the right size from the size chart.
Technical specifications:
- Product: Laatu cut-resistant glove 3231CX Cut Light class C (Laatuhanska Cut Light C/3, model 5003).
- Standard: EN 388:2016.
- Protection rating: 3231CX (abrasion 3, cut Coup 2, tear 3, puncture 1, cut ISO 13997 level C, impact protection not tested).
- Knit gauge: 18 gauge, seamless.
- Body material: HPPE, fibreglass.
- Coating: Polyurethane (PU), palm and fingertips.
- Construction: Extra thin, low-linting.
- Colour: Blue body, black coating.
- CE marking: Yes.
Laatu cut-resistant glove 3231CX instructions for use:
Inspect the glove visually before each use. Do not use the glove if the knit has holes or unravelled areas or the coating has come off, because damage weakens the cut protection. Choose a size that fits closely without squeezing; a glove that is too large weakens fingertip feel and grip.
Put the glove on a dry hand and pull the cuff over the wrist. After use, remove loose dirt by shaking or brushing and let the glove dry at room temperature. Store dry and protected from light. Replace the glove when the coating is worn through or the knit is damaged.
Warnings:
- No protection against fire or heat: The Laatu cut-resistant glove 3231CX is a mechanical protective glove (EN 388). It is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Do not use the glove for welding, hot work, grilling or handling hot objects; the HPPE knit and PU coating can melt and cause burns.
- No protection against rotating blades: A cut-resistant glove does not protect against injuries caused by powered saws, grinding discs or rotating blades. Do not use the glove near rotating machine parts because of the risk of entanglement.
- Class C is not enough for a high cut risk: Handling heavy sheet metal, glass panes or blades requires a class E or F cut-resistant glove.
- No puncture protection against needles: Puncture resistance level 1; the glove does not protect against thin needles or spikes.
- No chemical or moisture protection: The glove is not EN ISO 374 classified. The PU coating is not waterproof and is not suitable for oily or wet work.
- Damaged glove: A hole, cut or unravelled knit removes the protection; dispose of a damaged glove.
Frequently asked questions (FAQ):
What does the EN 388:2016 rating 3231CX mean on a cut-resistant glove?
The numbers and letters give the test results in order: abrasion resistance 3 (scale 1–4), cut resistance in the Coup test 2 (1–5), tear resistance 3 (1–4), puncture resistance 1 (1–4), cut resistance in the ISO 13997 test C (A–F, C = at least 10 N), and X means that impact protection has not been tested.
What is the difference between the Laatu cut-resistant glove 3231CX Cut Light and the class F Cut Super glove?
Cut Light is an 18 gauge thin class C glove for moderate cut risk and precision work; Cut Super is a 15 gauge class F glove with a nitrile foam palm for high cut risk and wet work.
Is a PU-coated cut-resistant glove suitable for oily work?
Not primarily. The PU coating gives the best grip on dry and slightly damp objects; a nitrile foam coating is better suited to oily work.
Why is an 18 gauge cut-resistant glove suitable for electronics and packing work?
The thin knit keeps fingertip feel, and the low-linting construction leaves no fibres on products, which is important in work that requires cleanliness.
Recycling instructions:
- Glove: The Laatu cut-resistant glove 3231CX is a combination of HPPE, fibreglass and polyurethane materials, and it goes to mixed waste or energy waste according to local waste management instructions.
- Packaging: Sort the hanger card into cardboard collection and any plastic bag into plastic collection.
