Description
The Laatu winter work glove 2141X is a winter glove classified under EN 388:2016 that is lined and fully coated and has a mechanical protection rating of 2141X: abrasion resistance level 2, cut resistance in the Coup test level 1, tear resistance level 4 (highest on the scale) and puncture resistance level 1. The glove is intended for freezing conditions and wet work where the hand must stay dry and the wearer must be visible.
The body is a 13 gauge seamless knit made of acrylic, polyester and elastane. The acrylic content adds to the thermal insulation of the lining, and the elastane adds stretch that keeps the glove ergonomically in the shape of the hand. The knit is soft and flexible, which keeps mobility despite the thicker construction.
The glove is coated with latex and latex foam over its whole surface, including the back of the hand and the cuff. The continuous coating stops liquids getting through, so the glove is waterproof throughout its construction, not only in the palm area. The surface structure of the latex foam gives a secure grip on wet, oily and icy items.
The outer colour of the glove is high-visibility orange (Hi-Vis), which improves the visibility of hands and hand signals at dusk and in snowy surroundings. Tear resistance level 4 is the highest on the scale and shows how well the glove withstands pulling and snagging. The Laatu winter work glove 2141X is a variable product available in several sizes.
Laatu winter work glove 2141X, intended use and suitability:
The Laatu winter work glove 2141X is intended for wet and cold handling work where waterproofing and thermal insulation are decisive. For drier winter work that needs more abrasion resistance, choose the Laatu fitter’s glove 4131X, and for cut risks the Laatu cut-resistant glove 3231CX Cut Light.
- Outdoor work in freezing temperatures: Construction, maintenance and installation work where the hand is exposed to snow, slush and meltwater and the full coating keeps the hand dry.
- Fisheries and food handling: Handling wet and slippery items, where the surface friction of the latex foam is kept even when wet.
- Agriculture and forestry: Fencing work, equipment maintenance and handling loads in damp terrain.
- Property maintenance and snow clearing: Removing snow and ice, gritting and care of outdoor areas, where tear resistance level 4 withstands pulling and snagging.
- Traffic and road maintenance work: Work sites where the high-visibility orange supports the visibility of the wearer.
Package contents:
- Laatu winter work glove 2141X waterproof Hi-Vis colour, 1 pair
Laatu winter work glove 2141X features:
- Fully coated and waterproof: The continuous latex coating covers the palm, the back of the hand and the cuff, so liquids cannot get through the glove.
- Tear resistance level 4: The highest tear resistance class on the EN 388:2016 scale withstands pulling and snagging.
- 13 gauge lining with acrylic content: A soft, insulating knit sized for a precise fit.
- Latex foam surface: The roughened foam surface gives a secure grip on wet and icy items.
- High-visibility orange: The Hi-Vis outer surface improves the visibility of the hands at dusk and in snowy surroundings.
- Ergonomic design: The flexible knit and pre-shaped cut reduce pressure on the hand during long use.
- Variable product: Available in several sizes, so the fit can be chosen to suit the wearer.
Technical specifications:
- Product: Laatu winter work glove 2141X waterproof Hi-Vis colour (manufacturer’s product name Laatuhanska Winter Grip Talvi, model 3050W).
- Standard: EN 388:2016.
- Protection rating: 2141X (abrasion 2, cut Coup 1, tear 4, puncture 1, cut ISO 13997 not tested).
- Knit gauge: 13 gauge, seamless.
- Body material: Acrylic, polyester, elastane.
- Coating: Latex and latex foam, whole glove coated.
- Waterproofing: The fully coated construction stops liquids getting through.
- Colour: High-visibility orange.
- CE marking: Yes.
Laatu winter work glove 2141X instructions for use:
Inspect the glove visually before each use. Do not use the glove if the latex coating has cracks, holes or detached areas, because the waterproofing depends on a continuous coating. Choose a size that fits closely without squeezing: a glove that is too tight restricts blood circulation and so reduces thermal insulation.
Put the glove on a dry hand and pull the cuff over or under the sleeve of your work clothing depending on which direction water runs from. After use, rinse the coating with clean water if needed, turn the glove to dry from the cuff opening and let it dry at room temperature. Do not dry it on a radiator or near an open fire, because heat hardens the latex. Store dry and protected from light. Replace the glove when the coating is worn through or the lining has compressed.
Warnings:
- No protection against fire or heat: The Laatu winter work glove 2141X is a mechanical protective glove (EN 388). It is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Do not use the glove for welding, hot work or handling hot objects; the knit and latex coating can melt and cause burns.
- Only minor cut protection: The cut resistance is level 1 (Coup), and ISO 13997 cut resistance has not been tested. The glove is not suitable for handling sharp edges, glass, sheet metal or blades.
- Limited abrasion resistance: The abrasion resistance is level 2, so the coating wears quickly on rough concrete and stone surfaces.
- No chemical protection: The glove is not EN ISO 374 classified and must not be used for handling chemicals, even though the coating is impermeable to liquids.
- Latex allergy: The coating contains natural rubber latex, which can cause an allergic reaction in sensitised users.
- No protection against rotating machine parts: Do not use the glove near rotating blades or machine parts because of the risk of entanglement.
- Wet lining: If water gets into the glove through the cuff, the lining conducts heat and the risk of frostbite increases; change to a dry glove.
Frequently asked questions (FAQ):
What does the EN 388:2016 rating 2141X mean on a winter glove?
The numbers and the letter give the mechanical test results in order: abrasion resistance 2 (scale 1–4), cut resistance in the Coup test 1 (1–5), tear resistance 4 (1–4, highest), puncture resistance 1 (1–4), and X means that ISO 13997 cut resistance has not been tested. The rating covers mechanical protection, not cold protection.
Is the Laatu winter work glove 2141X waterproof on the back of the hand too?
Yes. The latex coating covers the whole glove, including the back of the hand and the cuff, so liquids cannot get through the construction. Water can still run in through the cuff opening if the hand is under water.
What temperatures is the Laatu winter work glove 2141X suitable for?
The glove is a 13 gauge lined model with acrylic content, intended for freezing conditions and wet environments. Numerical limits for cold protection require an EN 511 rating, which is not part of this model’s CE classification.
How does the Laatu winter work glove 2141X differ from a partly coated winter glove?
In a partly coated glove the back of the hand is breathable knit that lets moisture through in both directions. The fully coated 2141X keeps water out but does not let sweat out, so it suits wet work and the partly coated one suits dry work.
Can the glove be washed?
The coating can be rinsed with clean water and dried at room temperature. Machine washing, solvents and heat drying harden the latex and shorten the life of the glove.
Recycling instructions:
- Glove: The Laatu winter work glove 2141X is a combination of acrylic, polyester, elastane and latex coating, and it goes to mixed waste or energy waste according to local waste management instructions.
- Packaging: Sort the hanger card into cardboard collection and any plastic bag into plastic collection.
