Description
The Schwan tile spacer wedge set 4-IN-1 (1.0 mm – 2.5 mm) is a professional aid developed especially for tiling work that requires precision. This innovative product combines four different joint widths in one ergonomic wedge: 1.0 mm, 1.5 mm, 2.0 mm and 2.5 mm. The smaller joint sizes make this set an ideal choice for modern rectified (straight-edged) tiles, where you want a narrow, inconspicuous joint.
The design of the product differs significantly from traditional tile crosses. The wide, grippy construction of the wedge makes it easy to handle and, most importantly, effortless to remove from the joint after installation. Traditional crosses often get stuck or break inside the joint, but Schwan spacer wedges are designed to be removed whole. This feature not only speeds up work but also makes the product reusable, which saves material costs in the long run.
The wedges are made of durable plastic that keeps its shape under compression but does not damage the edge of the tile. The hollow construction and the quality of the material stop the wedge sticking too firmly in tile adhesive or grout. This guarantees that the joints stay clean and consistent over the whole tiled area. The product is excellent for both wall and floor tiling where high dimensional accuracy is required.
The pack contains 50 wedges, which is enough to cover a large working area, as the wedges can be moved along as work progresses. Clear size markings on the wedge make sure the installer always chooses the right side for the required joint width, eliminating measuring errors even in a busy working environment.
Intended use:
The Schwan tile spacer wedge set 4-IN-1 is aimed at professional use on jobs that require narrow, precise joints. Its uses are varied:
- Installing rectified tiles: Particularly suitable for straight-edged (laser-cut) tiles, where a 1.0–2.0 mm joint is typically used to create an even, uniform surface.
- Wall tiling: The light, durable construction works excellently on vertical surfaces, holding the tiles in place without slipping.
- Small and medium-sized floor tiles: Suitable for floor tiling in bathrooms, kitchens and other interiors where you want to minimise the visibility of the joint.
- Demanding laying patterns: Four different sizes in the same tool allow quick changes in joint width, which is useful in complex layouts or when dimensional errors in the substrate need to be compensated subtly.
Package contents:
- Schwan tile spacer wedges 4-IN-1 (1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm) – 50 pieces
Features:
- 4-in-1 functionality: One wedge includes four different joint sizes (1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm), reducing the need to carry several bags of crosses in different sizes.
- Easy removal: The wide, ergonomic head lets you pull the wedge out of the joint with your fingers, without tools, once the mortar has dried.
- Economical: The durable construction lets you wash and reuse the wedges many times.
- Precision: Made of dimensionally accurate plastic that does not compress under the weight of the tiles, ensuring a joint of even width.
- Clean result: The construction stops the wedge sinking deep into the mortar, so you do not have to remove broken pieces of cross from the bottom of the joint at the grouting stage.
Technical specifications:
- Joint widths: 1.0 mm / 1.5 mm / 2.0 mm / 2.5 mm
- Package contents: 50 pcs
- Material: Polypropylene / plastic
- Colour: Green (high-visibility colour makes them easier to spot)
Schwan tile spacer wedge set 4-IN-1 instructions for use:
For the best result, follow these instructions when using the wedges:
- Preparation and choosing the size: Clean the surface to be tiled and apply the tile adhesive. Choose the joint width you want (1.0, 1.5, 2.0 or 2.5 mm) from the markings on the sides of the wedge.
- Placing the wedge: Place the tile. Push the wedge between the tiles so that the chosen size side is against the tile. The wedge can be used at tile intersections or along the sides. Make sure the wider “handle part” of the wedge stays clearly visible and easy to grip.
- Continuing tiling: Continue tiling and add wedges as needed to make sure the joints are even. Check regularly that the tiles are level with each other.
- Removal: Let the tile adhesive dry according to the manufacturer’s instructions (usually until the next day). Grip the wide part of the wedge and pull it straight out of the joint. Do not twist it, so that the edge of the tile is not damaged.
- Care: Clean the wedges with water immediately after removal so that no dried mortar is left on them. Dry wedges are ready for the next project.
Warnings:
- Drying time: Make sure the tile adhesive has cured enough before removing the wedges. Removing them too early can move the tiles.
- Cleaning: Do not let mortar harden on the surface of the wedges, as this can affect dimensional accuracy the next time they are used.
- Child safety: The product contains small parts and can cause a choking hazard. Keep out of the reach of children.
Frequently asked questions (FAQ):
- Is this product suitable for large floor tiles?: Yes, but a joint width of 1.0–2.5 mm is typical especially for rectified (dimensionally accurate) tiles. If the dimensional tolerances of the tile are large, a wider joint is recommended.
- How do I choose the right size from the four options?: The size is chosen according to the tile manufacturer’s recommendation and the look you want. A 1.0–1.5 mm joint is very inconspicuous, while 2.0–2.5 mm gives more leeway for installation.
- Are the wedges disposable?: No. Schwan spacer wedges are designed specifically to be reusable, which makes them a more ecological option.
Recycling instructions:
The product and its packaging must be disposed of properly:
- Product (plastic wedges): Cleaned wedges taken out of use are sorted for plastic collection. If they are very dirty (hardened mortar/adhesive), they belong in mixed waste.
- Packaging: The packaging bag is sorted with plastic packaging.
