Description
The Yato cross laser uses a green laser diode that projects a clearly visible horizontal (1 H) and vertical (1 V) line. The green beam gives high visual contrast on various surface materials and ensures optimal visibility even in brightly lit working environments.
The optics of the laser split the beam into two intersecting lines for marking accurate 90-degree references. Projecting both lines at once speeds up tasks that need two-dimensional alignment, letting you align levels and vertical structures without separate measuring equipment.
The laser is powered by two standard AA batteries (sold separately), which guarantees that it is ready for use immediately and easy to maintain without depending on separate charging docks. Battery power is a logistical advantage on sites where mains power is not always available.
The mechanical construction of the laser meets the requirements of the IP54 standard, protecting the internal components from harmful dust and from water splashes from any direction. This protection rating ensures that the optics and electronics stay reliable in demanding working environments with dust and moisture.
Intended use and suitability:
The Yato cross laser is designed for a wide range of measuring and alignment work where a two-dimensional visual reference is needed for drawing straight lines.
- Installing structures and frames: The vertical beam (1 V) lets you ensure that wall frames and partitions are accurately plumb, while the horizontal beam (1 H) gives a reliable reference for the height of thresholds, bottom plates and top plates.
- Fixing surface materials: Thanks to the crossing lines, tiles, panels and wallpaper are installed at right angles and level heights systematically, without drawing physical guide lines on the surfaces by hand.
- Positioning fittings and HVAC equipment: The green laser line gives a clear guide for the horizontal and vertical alignment of shelves, electrical cabinets, sockets and cable trays, even along long stretches of wall.
Package contents:
- Laser: 1 pc Yato cross laser (green beam, 1V + 1H).
- Storage case: 1 pc
- Magnetic base: 1 pc
Features:
The laser’s technology is optimised for maximum clarity and resistance to conditions.
- Green laser diode: The green wavelength stands out more strongly to the human eye against different backgrounds, which reduces reading errors.
- Cross-line projection: The combined vertical and horizontal beams (2 lines) form a fixed reference cross for checking levels instantly.
- IP54 housing: The splash- and dust-protected construction allows safe use in the dusty and damp stages of work on site.
- AA battery power: Using standard power sources prevents interruptions at workstations without mains power.
Technical specifications:
- Beam colour: Green.
- Number of lines: 2 (1 vertical, 1 horizontal).
- Power source: 2 x AA.
- Protection rating: IP54.
- Accuracy: 1.5 mm / 5 m
- Range: 25 m
Yato cross laser instructions for use:
Mechanical use of the laser is based on stable positioning and careful installation of the power source.
1. Open the battery compartment and insert two AA batteries according to the polarity markings. Close the cover tightly to keep the IP54 seal.
2. Place the laser on a flat, stable working surface at the measuring point you want.
3. Switch the laser on with the main switch, and it projects a green cross line on the target surface.
4. Carry out the installation of structures or fittings according to the projected horizontal and vertical lines.
5. Switch off the power when you have finished and, if needed, clean particles off the glass of the optics with a dry, soft microfibre cloth.
Warnings:
The optical power of the laser requires safety regulations to be followed where it is used.
- Optical hazard: Never look directly into the laser beam or deliberately point the beam at other people or animals, to avoid injury.
- Reflections: Avoid aiming the laser at highly reflective surfaces such as glass or polished metal, to prevent uncontrolled reflections of the beam.
- Housing integrity: The laser must not be immersed in liquids, and opening the housing mechanically voids the IP54 protection.
Frequently asked questions (FAQ):
Below are expert answers on the power source and protection of the laser.
- Question: How is the power source of the laser set up for long use without charging?
Answer: The laser runs on two replaceable AA batteries, so the power source can be renewed immediately on site without waiting for batteries to charge. - Question: Does the housing of the laser ensure operation on dusty renovation sites?
Answer: Yes. The IP54 protection rating of the laser is an official standard that guarantees protection of the internal electronics and optics against harmful amounts of dust and against splashing water from all directions. - Question: What does “1V + 1H” mean in the laser’s optical projection?
Answer: It is an abbreviation stating that the laser projects exactly one vertical (V) and one horizontal (H) line, which together form a two-dimensional cross.
Recycling instructions:
The end-of-life treatment of the laser and its components must follow material- and electronics-specific regulations.
- Electronics and optics: The laser is classed as waste electrical and electronic equipment (WEEE) and must be taken to an official WEEE recycling point.
- Power sources: Used AA batteries must be removed from the laser and taken to a local battery collection point to prevent chemical leaks.
- Packaging: The cardboard and plastic materials of the packaging must be separated and taken to the appropriate material-specific collection bins.
