Description
The Flo loppers 660–910 mm with telescopic handle are a bypass branch cutter for tidying trees and shrubs. The length adjustment lets you extend your reach without a ladder, while the shorter setting gives more power and control in precision work. A bypass cut is recommended for live wood because it leaves a cleaner cut that tears fewer fibres.
The triangular-profile steel handles add stiffness and torsional strength, which reduces flex at long reach. The length is adjusted in steps, and the handles lock securely at the working length so that your grip stays stable during the cut. Padded grips improve grip even with gloves and reduce the shock transmitted to the hands.
The geometry of the cutter and the long lever arm help you use mechanical advantage on thicker branches, which makes work lighter and more repeatable. Typical uses are maintenance pruning in the garden, annual rejuvenation pruning of fruit trees, and shaping shrubs and removing dry branches.
Keeping the tool serviceable, for example by regularly cleaning and lubricating the cutting surfaces, extends its service life. When the blades are kept sharp and the pivot bolt suitably tightened, cutting takes less squeezing force and the cut stays neat.
Intended use:
-
Maintenance pruning of trees and shrubs: Thanks to the telescopic handle, you can reach treetops and the centre of shrubs without extra aids. A bypass cut is gentle on live branches and supports fast wound closure when the cut is made outside the branch collar at the right angle.
-
Removing dry and damaged branches: The long lever arm produces enough force for dry branches and storm-damaged shoots. Removing a branch cleanly reduces the surface available for pathogens and makes it easier to shape the plants for future seasons.
-
Shaping and maintenance pruning of boundary hedges and ornamental trees: The stepped length adjustment helps keep your working position ergonomic even when the spot you are working on is a little further away. This keeps the cutting line controlled and repeatable during long working sessions.
-
Production pruning of fruit trees: A precise bypass cut minimises tearing on fruit tree species. Removing water shoots and crossing branches carefully improves light penetration and balanced growth for the next harvest season.
Features:
-
Cutting type: Bypass cut : A clean cut on live wood that reduces fibre tearing.
-
Length adjustment: Telescopic handle 660–910 mm : Reach without a ladder; better ergonomics.
-
Handle construction: Triangular-profile steel handles : Stiffness and torsional strength at long reach.
-
Grips: Padded, non-slip grips : Better grip even with gloves, less shock transmitted to the hands.
-
Locking: Length locks in steps : Stops the handle from sliding in under load.
-
Maintenance: Cleaning and light oiling of the blades : Protects against corrosion and keeps cutting performance.
-
Uses: Trees, shrubs, fruit trees, removing dry branches : Maintenance and shaping pruning.
Flo loppers: instructions for use:
-
Adjustment: Choose a suitable working length (660–910 mm) and lock the handles according to the manufacturer’s instructions.
-
Cutting: Position the blades on the branch so that the cut is made outside the branch collar. Press the handles evenly; do not twist sideways.
-
Working rhythm: Cut the small branches first, then move on to thicker ones. Keep your feet clear of the work area and make sure you stand firmly.
-
Maintenance after use: Clean resin and moisture off the loppers, dry them and add a light film of oil to the cutting edges and pivot bolt. Check that the pivot bolt has not loosened.
Warnings:
-
Do not use near power lines; watch out for falling branches.
-
Do not cut hard materials (metal/stone); the tool is intended for wood and shrubs.
-
Store locked, out of the reach of children.
-
Wear protective gloves and glasses to protect against splashes and splinters.
-
Make sure the length lock has engaged before cutting.
Frequently asked questions (FAQ):
Bypass or anvil cut?
Bypass is best for live wood: the blade slides past the counter blade and makes a clean cut. An anvil model often suits dry, hard wood, but it can crush live tissue.
How do I stop resin sticking to the blades?
Clean after use and use a light oil or resin remover. A layer of resin increases friction and reduces cutting performance.
How often should I sharpen?
When more squeezing force is needed and the cut becomes rough. Sharpen with a fine file/whetstone following the original angle, remove the burr and oil.
What if the handle lock loosens?
Stop work, tighten the lock according to the mechanism’s instructions and continue only when the handles lock clearly.
Recycling instructions:
-
Product at the end of its life: Steel parts → metal recycling; plastic/rubber grips → according to local rules.
