Description
The Kapro 875G Prolaser All-Lines Green is an advanced, versatile self-levelling multi-line laser designed for demanding measuring, alignment and levelling tasks. It projects a bright green horizontal line and four vertical lines that cross at 90 degrees on the ceiling and walls, forming a perfect cross directly above the laser. The laser also has a plumb point down, which lets you transfer points from floor to ceiling accurately and quickly and position the laser precisely over the point you want. Thanks to green laser technology, the beams are much more visible than those of conventional red lasers, which makes work easier in bright lighting and extends the visual working range.
At the heart of the laser is a precise self-levelling pendulum mechanism with a working range of ±2.5 degrees. The mechanism levels the lines automatically and quickly after switch-on. If the laser is tilted more than the levelling range allows, the laser beams flash as a visual warning. A manual mode adds versatility: it locks the pendulum mechanism so that the laser beams can be used to mark sloping lines, such as stairs or roof pitches, at the angle you want. The laser has a pulse mode that lets you use it with a separate laser receiver. This extends the working range considerably and allows work even in conditions where the laser beam cannot be seen with the naked eye.
The body of the Kapro 875G is mounted on a sturdy 360-degree rotating base with an integrated fine adjustment knob. This lets you align the vertical beams very precisely and move them to the target without physically moving the whole laser. Power is flexible thanks to a hybrid system: the laser runs either on the supplied rechargeable Li-ion batteries (the kit includes two batteries) or on standard AA batteries, which ensures continuous use. The body is protected by an impact-resistant rubber coating and the laser has an IP54 protection rating. The laser has a sturdy 5/8″ thread, and the kit also includes a tripod adapter and a sturdy tripod, so it is fully ready for use.
Intended use:
- Construction and framing: For accurate alignment and straightening of walls, ceilings and floors and for marking perfect 90-degree angles in a room.
- Interior fitting and installation: For horizontal and vertical levelling and symmetrical placing of cabinets, shelves, sockets, switches and other fixed furniture.
- Tiling and floor surfaces: For laying floor and wall tiles straight, aligning patterns and ensuring right angles even on large surfaces.
- HVAC, plumbing and electrical installations: For straight alignment of pipe runs, cable trays and ducts and for setting the correct slope in manual mode.
Package contents:
- Kapro 875G cross-line laser
- Sturdy tripod
- Hard, padded protective case
- Green laser enhancement glasses
- Two rechargeable Li-ion batteries
- Laser target plate
- Tripod adapter
- USB-C charging cable
Features:
- Green laser beam: Gives much better visibility and brightness than red beams, making work easier in bright rooms.
- Multi-line projection: Produces 1 horizontal line, 4 vertical lines (forming 90° crosses on the walls and ceiling) and 1 plumb point down for complete control of the room.
- Self-levelling: ±2.5 degree automatic levelling ensures accurate lines quickly and reliably.
- Manual mode: Lets you lock the pendulum and use the beams at the angle you want for aligning slopes and stairs.
- Fine adjustment: The 360-degree rotating body with a fine adjustment knob allows very precise alignment of the vertical beams.
- Hybrid power and USB-C: Runs on rechargeable Li-ion batteries (2 pcs included) or AA batteries. The batteries are charged with a modern USB-C cable.
- Complete kit: Includes everything you need, such as a tripod, two batteries, enhancement glasses and a hard, padded case.
Technical specifications:
- Accuracy: ±0.2 mm/m.
- Range (visual): Up to 30 m (depending on ambient lighting).
- Range with receiver: Up to 60 m (with a compatible Kapro receiver, sold separately).
- Self-levelling range: ±2.5°.
- Laser class: Class II (green).
- Wavelength: 520 ±10nm.
- Protection rating: IP54 (dust and splash-proof).
- Tripod thread: 5/8″ (adapter also included).
- Power source: Rechargeable Li-ion battery (7.4V) or 4 x AA batteries.
Kapro cross-line laser kit 875G instructions for use:
Insert one of the rechargeable Li-ion batteries in the laser or use AA batteries with the battery adapter. Place the laser on a level surface or mount it on the tripod included in the kit (use the adapter if needed). Switch the laser on by turning the main switch to ON, which activates self-levelling. The laser levels the lines automatically within a range of ±2.5 degrees. If the laser is outside the levelling range, the beams flash; adjust the base or tripod in that case.
Select the laser lines you want (horizontal H, vertical V) on the keypad on top of the laser. Use the fine adjustment knob to align the vertical lines precisely on the target. To mark angles and slopes, switch the laser to manual mode (see the model-specific instructions on locking the pendulum for manual use). In this mode, the beams do not self-level.
Charge the batteries with the USB-C charging cable. One battery can be charging while the other is in use. Use the green laser enhancement glasses to improve beam visibility in bright conditions. Always switch the laser to OFF (the pendulum lock engages) for transport and storage.
Warnings:
- Laser class II: Do not look directly into the laser beam and do not point it into the eyes of other people or animals.
- Transport lock: Always make sure the pendulum mechanism is locked (switch in the OFF position) before moving the laser or putting it in the carrying case, to avoid mechanical damage.
- Handling the batteries: Use only the rechargeable Li-ion batteries and USB-C cable supplied with the laser. Do not expose the batteries to extreme heat or moisture.
- Checking accuracy: Check the calibration of the laser regularly, especially before important measurements or if the laser has been subjected to impacts.
Frequently asked questions (FAQ):
- Why does the kit have two batteries?: With two batteries you can use the laser without interruption: one battery can be in use while the other is charging with the USB-C cable.
- How does a green laser differ from a red one?: Green light is naturally easier for the human eye to see, which makes a green laser beam much brighter and more visible at the same power, especially in bright indoor spaces.
- Can the laser be used outdoors?: Yes. Visibility is limited in direct sunlight, but the laser has a pulse mode that lets you use it with a laser receiver (sold separately) at a range of up to 60 metres.
- How is manual mode switched on for slopes?: Manual mode is usually switched on with a separate button or by holding down the line selection button while the main switch is in the OFF position (pendulum locked). Check the exact function in the button descriptions of the laser.
Recycling instructions:
The cardboard packaging goes to cardboard collection. The hard plastic protective case goes to plastic collection. The laser, tripod, charging cable and adapters are waste electrical and electronic equipment (WEEE) and must be taken to a suitable collection point. Rechargeable Li-ion batteries are hazardous waste and must be taken to a battery recycling point. Do not dispose of the laser or batteries with mixed waste.
