Description
The Laatu general-purpose glove 3121X is an installation and general-purpose work glove classified under EN 388:2016 with a mechanical protection rating of 3121X: abrasion resistance level 3, cut resistance (Coup test) level 1, tear resistance level 2 and puncture resistance level 1. The letter X means that ISO 13997 cut resistance has not been tested. The Laatu general-purpose glove 3121X is intended for work that needs a secure grip on damp and oily items and a hard-wearing palm.
The body of the glove is a 13 gauge seamless polyester-elastane knit. The knit is flexible and breathable, and the seamless construction removes chafing seams between the fingers. A 13 gauge knit is slightly thicker than in 15 and 18 gauge precision gloves, which makes the glove last longer in abrasive handling work.
The palm and fingertips are coated with smooth nitrile. The coating is thick and dense, so it forms a continuous film on the palm side and resists moisture, oils and greases. The smooth nitrile surface gives a secure grip on smooth metal parts and tools, and the surface is easy to wipe clean.
The back of the hand is left uncoated, so the knit lets air through and the hand stays cooler during long shifts. The glove is CE-marked personal protective equipment and is available in several sizes; choose the right size from the size chart.
Laatu general-purpose glove 3121X, intended use and suitability:
The Laatu general-purpose glove 3121X belongs to Laatuhanska’s nitrile-coated general-purpose gloves. It suits work where grip, abrasion resistance and oil resistance matter more than cut protection or a very thin fingertip feel. For work with a cut risk, choose the Laatu cut-resistant glove 3231CX Cut Light, and for tasks that require using touchscreens the Laatu general-purpose glove 4121X.
- Vehicle repair and servicing: Handling oily and greasy parts, where the dense nitrile coating stops oil soaking into the palm and holds the grip on slippery parts.
- Installation and maintenance work: Installing machines, equipment and pipework, where the 13 gauge knit keeps mobility and the coating gives grip on tools.
- Logistics and warehouse work: Handling boxes, general cargo and pallets, where abrasion resistance level 3 extends the life of the glove.
- Construction and indoor work: Light construction, HVAC and furniture installation work in dry and damp conditions.
- Property maintenance and outdoor work: General maintenance and cleaning tasks where the hand is exposed to moisture and dirt.
Package contents:
- Laatu general-purpose glove 3121X Nitro Grip nitrile 13 ga, 1 pair
Laatu general-purpose glove 3121X features:
- Smooth, thick nitrile coating: The dense coating on the palm and fingertips resists moisture, oils and greases and gives a secure grip on smooth items.
- 13 gauge seamless knit: Polyester-elastane body without chafing seams; flexible and close fitting.
- Abrasion resistance level 3: The second-highest abrasion resistance class on the EN 388:2016 scale, for abrasive handling work.
- Breathable back of hand: The uncoated back lets air through and reduces sweating.
- Cleanable grip surface: The smooth nitrile surface does not collect dirt the way knit does, and it can be wiped during use.
- Flexible construction: The elastane fibre returns the knit to its shape and keeps the glove snug on the hand.
- Several sizes: Available in several sizes; choose the size from the size chart.
Technical specifications:
- Product: Laatu general-purpose glove 3121X Nitro Grip nitrile 13 ga (Laatuhanska Nitro Grip, model 2010).
- Standard: EN 388:2016.
- Protection rating: 3121X (abrasion 3, cut Coup 1, tear 2, puncture 1, cut ISO 13997 not tested).
- Knit gauge: 13 gauge, seamless.
- Body material: Polyester, elastane.
- Coating: Nitrile, smooth, palm and fingertips.
- Back of hand: Uncoated knit.
- Colour: White body, grey coating.
- CE marking: Yes.
Laatu general-purpose glove 3121X instructions for use:
Inspect the glove visually before each use. Do not use the glove if the knit has holes or the nitrile coating has cracked or come off. Choose a size that fits closely without squeezing: a glove that is too loose weakens the grip and one that is too tight tires the hand.
Put the glove on a dry hand and pull the elastic cuff over the wrist. During work you can wipe oil and dirt off the coated palm. After use, remove loose dirt by shaking or brushing and let the glove dry at room temperature without a direct heat source. Store dry and protected from light. Replace the glove when the coating is worn through or the knit is damaged.
Warnings:
- No protection against fire or heat: The Laatu general-purpose glove 3121X is a mechanical protective glove (EN 388). It is not EN 407 classified and does not protect against fire, flames, sparks, hot surfaces or molten metal. Do not use the glove for welding, hot work or handling hot objects; the knit and nitrile coating can melt and cause burns.
- Not a chemical protective glove: The glove has no EN ISO 374 rating. The nitrile coating resists oils and greases, but the glove must not be used for handling chemicals, solvents or acids.
- Only minor cut protection: Cut resistance level 1 (Coup), and ISO 13997 cut resistance has not been tested. The glove is not suitable for handling sharp edges, sheet metal, glass or blades.
- No protection against rotating machine parts: Do not use the glove near rotating blades or machine parts because of the risk of entanglement.
- No electrical protection: The glove does not protect against electric shock and must not be used for live work.
- Damaged glove: A hole or detached coating removes the protection; dispose of a damaged glove.
Frequently asked questions (FAQ):
What does the EN 388:2016 rating 3121X mean on a work glove?
The markings give the test results in order: abrasion resistance 3 (scale 1–4), cut resistance in the Coup test 1 (1–5), tear resistance 2 (1–4), puncture resistance 1 (1–4), and X means that ISO 13997 cut resistance has not been tested.
Is the Laatu general-purpose glove 3121X suitable for handling oily parts?
Yes. The dense nitrile coating on the palm resists oils and greases, and oil does not soak through the coated area. The back of the hand is uncoated, so it gets wet and dirty.
What is the difference between a smooth nitrile coating and nitrile foam?
Smooth nitrile forms a dense, liquid-tight film and withstands wear better. Nitrile foam is porous, more breathable and softer, but its surface absorbs a little moisture.
Does the Laatu general-purpose glove 3121X protect against chemicals?
No. The glove has no EN ISO 374 chemical protection rating. It resists oils and greases in mechanical work, but handling chemicals requires an EN ISO 374 classified chemical protective glove.
What does a 13 gauge knit mean?
The gauge gives the density of the knit: the higher the number, the thinner the knit. 13 gauge is a middle ground between durable and precise: it is thicker and more hard-wearing than 15 and 18 gauge precision gloves. For thinner precision work, choose the Laatu fitter’s glove 3121X extra thin.
Recycling instructions:
- Glove: The Laatu general-purpose glove 3121X is a combination of polyester, elastane and nitrile coating that cannot be separated into materials. A glove at the end of its life goes to mixed waste or energy waste according to local waste management instructions.
- Oily glove: A glove soaked in oil or another hazardous substance is treated as hazardous waste according to local instructions.
- Packaging: Sort the hanger card into cardboard collection and any plastic bag into plastic collection.
