Description
Procat fretsaw blade coarse is a pack of 12 coarse-toothed replacement blades for a fretsaw for sawing wood and plastic. The tooth pitch of the blade is 14 TPI (teeth per inch) and the cutting length 130 mm. The coarse teeth remove material quickly and keep the kerf clear of sawdust.
A fretsaw blade is a narrow, thin steel band that is attached between the ends of the fretsaw frame. The spring of the frame keeps the blade taut, so the blade stays straight and turns into curves and corners while sawing. A fretsaw is used to saw patterns, curved shapes and internal openings by hand in board-type materials.
The tooth pitch affects sawing speed and finish. A low TPI number means larger teeth and larger tooth gaps, which hold more sawdust. 14 TPI is a coarse tooth pitch suitable for thicker plywood, wood and plastic when sawing speed is more important than a smooth edge. The cut is rougher than with a fine-toothed blade.
The blade fits the Procat fretsaw frame 300 mm and other standard-size fretsaws. A thin blade can break with too much feed force or twisting, so the 12 pcs pack has replacement blades ready even for long sawing jobs.
Procat fretsaw blade coarse: intended use and suitability:
The coarse-toothed fretsaw blade is intended for fast hand sawing of shapes and patterns in wood and plastic.
- Thicker plywood: The coarse teeth saw thicker plywood faster than a fine blade, and the kerf does not clog with sawdust.
- Wood: Shaping wooden boards, battens and pieces into curves and corners when the edge will be finished later by sanding.
- Plastic: Sawing plastic sheets; the large tooth gaps clear the chips, which reduces the plastic melting and sticking to the blade.
- Internal openings: One end of the blade is released and threaded through a hole drilled in the workpiece, so the opening can be sawn without breaking the edge.
- Rough shaping: Removing excess material from a piece before more precise finishing with a finer blade.
Package contents:
- Fretsaw blade, coarse: 12 pcs.
Features:
- Coarse 14 TPI teeth: Fast sawing and effective sawdust removal in wood and plastic.
- Narrow blade: Turns into curves and is suitable for shape and scroll sawing.
- Compatibility: Fits the Procat fretsaw frame 300 mm and other standard-size fretsaws.
- Pack of 12: Replacement blades for several blade changes.
Technical specifications:
- Product type: Fretsaw blade, coarse.
- Tooth pitch: 14 TPI.
- Cutting length: 130 mm.
- Materials: Wood and plastic.
- Quantity: 12 pcs.
Procat fretsaw blade coarse instructions for use:
1. Fitting the blade: Attach the blade to one end of the frame so that the teeth point towards the handle; the saw then cuts on the pull stroke. Squeeze the frame together slightly, attach the other end of the blade and release the frame. The blade should be taut.
2. Internal opening: Drill a hole inside the opening, release one end of the blade, thread the blade through the hole and reattach it under tension.
3. Sawing: Clamp the workpiece firmly. Saw with long, even strokes with the blade vertical and let the teeth do the work without much pressure. In plastic, a slow pace stops the edge melting.
4. Storage: Store the replacement blades in a dry place and release the blade tension when the saw is not in use.
Warnings:
- Sharp teeth: Handle the blades with care and keep your fingers away from the cutting line.
- Breaking blade: The blade can break and fly off; wear safety glasses and do not twist the blade while sawing.
- Securing the workpiece: Clamp the piece or support it on the edge of a table before sawing.
- Children: Keep the blades out of the reach of children.
Frequently asked questions (FAQ):
Which fretsaw does the Procat fretsaw blade coarse fit? The blade fits the Procat fretsaw frame 300 mm and other standard-size fretsaws.
What does 14 TPI mean? The blade has 14 teeth per inch. The coarse teeth saw fast and remove sawdust effectively, but the finish is rougher than with a fine blade.
When is it worth choosing a coarse blade instead of a fine one? A coarse blade suits thicker plywood, wood and plastic when sawing speed matters most. For thin material and a neat edge, a fine-toothed blade such as Procat fretsaw blade fine 12 pcs is suitable.
Which way are the teeth fitted? The teeth point towards the handle, so the saw cuts on the pull stroke and the blade stays taut.
Recycling instructions:
Used and broken fretsaw blades are sorted for metal collection. Protect sharp blades, for example with tape or by wrapping them in paper, before putting them in the collection bin. The packaging is sorted by material for cardboard and plastic collection.
