Description
The Schwan 100 x 240 mm is a special grout float designed for professionals that stands out on the market for its exceptional durability. Unlike traditional grout floats, the working surface of this tool is not soft rubber but is made of a hard and extremely wear-resistant epoxy material. This innovative solution has been developed to meet the needs of professional tilers who work on large areas every day or use coarse, abrasive grouts that quickly wear out ordinary rubber floats.
The biggest advantage of an epoxy-faced float is its long service life. The hardness and density of epoxy mean that it withstands abrasion and mechanical strain considerably better than any rubber compound. This makes it an economical and reliable choice for demanding jobs, reducing the need to replace tools mid-contract. The fairly hard epoxy surface also allows grout to be pressed into the joints efficiently and precisely and excess material to be “cut” neatly off the tile surface.
Working ergonomics are ensured by a high-quality Softgrip handle. The shape and padded material of the handle guarantee a secure grip and reduce strain on the hand during long periods of work, which is essential in professional use. The tool size, 100 x 240 mm, is an optimal balance between efficiency and control, suitable for both large floor areas and jobs that require more precise work.
Intended use:
This product is aimed primarily at professional use, where maximum durability and performance are required from the tool.
- Abrasive grouts: An excellent choice when working coarse grouts or grouts containing quartz sand, which act like an abrasive and quickly wear soft rubber surfaces. The epoxy surface withstands this strain far better.
- Large tiling contracts: On jobs with hundreds or thousands of square metres to grout (e.g. shopping centres, halls), the wear resistance of the tool becomes a critical factor. This float keeps its shape and performance for a long time.
- Demanding professional use: For tilers who value long-lasting tools and want to avoid constantly buying new grout floats. The hard surface is also well suited to applying stiffer compounds.
Package contents:
- 1 pcs Schwan grout float, 100 x 240 mm, with epoxy working surface and Softgrip handle.
Features:
- Epoxy working surface: The bottom of the tool, which is in contact with the grout and the tile, is made of epoxy. This material offers far greater resistance to mechanical wear than rubber or cellular rubber.
- Long service life: Withstands hard use and abrasive materials considerably longer than traditional grouting tools, which makes it a cost-effective choice for professionals.
- Rigid construction: The epoxy surface is hard and rigid, which helps press the grout firmly to the bottom of the joint and makes it easier to clean excess material off the surface.
- Ergonomic Softgrip handle: The comfortable, secure handle makes work less tiring and improves control of the tool even in wet conditions.
Technical specifications:
- Product type: Grout float / float
- Width: 100 mm
- Length: 240 mm
- Working surface material: Epoxy (hard, extremely wear-resistant)
- Handle type: Ergonomic Softgrip
Schwan grout float instructions for use:
Use: Make sure the area to be grouted is clean and prepared. Mix the grout according to the manufacturer’s instructions. Spread grout on the tile surface and work it into the joints by drawing the epoxy-faced float diagonally across the joints. Use enough force to make sure the joints fill tightly to the bottom. The hardness of the epoxy surface helps at this stage. Once the joints are full, remove excess grout from the tile surface by holding the float at a steeper angle and drawing it firmly across the surface. The hard epoxy edge works as an efficient “screed”.
Maintenance and cleaning: Clean the tool carefully with water immediately after use, before the grout has time to dry on its surface. Although the epoxy surface is durable, dried cement or other grout can be hard to remove without damaging the tool. Keep the tool clean and dry.
Warnings:
Always follow the safety and usage instructions of the grout manufacturer. Wear suitable personal protective equipment, such as protective gloves, during tiling work. The working surface is hard, so take care not to scratch the most delicate tile surfaces (e.g. mirror glass tiles or very soft natural stones) if there is coarse sand in the joint.
Frequently asked questions (FAQ):
Q: How does this differ from an ordinary grout float?
A: The most significant difference is the material of the working surface. Ordinary rubber wears in use, especially with coarse grouts. The epoxy surface of this float is extremely hard and withstands wear many times longer.
Q: Is this suitable for applying epoxy grout?
A: Yes, the hardness and chemical resistance of the tool also make it excellent for applying stiff epoxy grouts, although its main advantage is the wear resistance of the surface with all kinds of grout.
Q: Is the working surface flexible?
A: No, the epoxy surface is hard and rigid. This gives a different feel from soft rubber but allows precise work and efficient pressing of the compound into the joint.
Recycling instructions:
At the end of its life, the tool is generally disposed of as mixed waste, as separating the different materials (epoxy, plastic handle, metal fixings) for recycling is difficult.
