Description
Vorel skeleton gun 09150 is an open-frame caulking gun for dispensing sealant from 300 ml cartridges. The cartridge is placed in the open frame, and squeezing the trigger pushes the plunger rod forward one step at a time.
The gun is intended for sealants, adhesives, silicones and other thick compounds. The skeleton design leaves the cartridge visible, so you can follow the amount of compound during work.
The frame takes a cartridge with a length of 230 mm and a diameter of 49 mm. These dimensions match common silicone and acrylic sealant cartridges.
The frame is made of thin sheet steel. The overall length of the gun is 32 cm and the width is 17 cm, and it suits renovation and finishing work such as sealing joints and gluing.
Intended use and suitability:
The Vorel skeleton gun is suitable for dispensing compounds packed in cartridges in indoor and outdoor work.
- Silicone sealing: sealing joints in bathrooms, kitchens and windows with silicone.
- Acrylic sealants and sealing compounds: filling gaps at mouldings, frames and wall joints before painting.
- Construction adhesives: fixing mouldings, panels and boards with cartridge adhesive.
- Renovation and finishing work: general sealing and gluing work using 300 ml cartridges.
Package contents:
The package contains one caulking gun.
- 1 × Vorel 09150 open-frame caulking gun
Features:
Main features of the design.
- Open skeleton frame: inserting and changing the cartridge is quick, and the amount of compound left is visible.
- Trigger mechanism: the trigger pushes the plunger forward, so you can dispense the compound evenly.
- 300 ml cartridge size: fits the most common sealant and silicone cartridges.
- Sheet steel frame: the open frame made of thin sheet steel holds the cartridge in place while squeezing.
Technical specifications:
Dimensions of the Vorel skeleton gun 09150 caulking gun.
- Frame type: open skeleton frame
- Frame material: thin sheet steel
- Cartridge volume: 300 ml
- Cartridge length: 230 mm
- Cartridge diameter: 49 mm
- Overall length: 32 cm
- Width: 17 cm
Vorel skeleton gun instructions for use:
1. Cut open the tip of the cartridge and screw the nozzle on. Cut the nozzle at an angle to the width of the joint you want. 2. Pull back the plunger rod and place the cartridge in the frame with its base towards the plunger. 3. Press the trigger until the plunger touches the base of the cartridge. 4. Hold the gun at an angle of about 45 degrees to the joint and squeeze the trigger evenly while moving the gun. 5. Stop the flow by releasing the plunger. Wipe compound residue off the frame and plunger before it hardens.
Warnings:
Always follow the safety instructions of the manufacturer of the compound you are using.
- Wear protective gloves if the compound irritates the skin.
- Ensure good ventilation when using solvent-based compounds.
- Release the plunger after work so that compound does not run out of the cartridge.
- Keep out of the reach of children.
Frequently asked questions (FAQ):
The most common questions about using the caulking gun.
What size cartridges does the Vorel skeleton gun 09150 caulking gun fit?
The gun is intended for 300 ml cartridges with a length of 230 mm and a diameter of 49 mm.
Can an open-frame caulking gun dispense other compounds besides silicone?
Yes. The gun suits sealants, adhesives, silicones and other thick compounds packed in cartridges.
Why is the cartridge visible in a skeleton-type caulking gun?
The open frame speeds up changing the cartridge and shows how much compound is left.
How do you stop the compound running once the joint is finished?
Release the plunger; the pressure in the cartridge drops and the flow stops.
Recycling instructions:
The Vorel skeleton gun has a steel frame, and a gun at the end of its life is taken to metal collection. Sort empty sealant cartridges according to local instructions. Sort packaging materials by material.
