Description
Yato belt tool pouch (YT-7416) is a deep nail and tool pouch made of nylon that hangs on a work belt. It keeps long nails, screws and nuts as well as small tools such as screwdriver bits, drill bits and screwdrivers within reach at the installation site.
The seams of the pouch are finished with edge binding, and the most heavily loaded points are reinforced with steel rivets. The rivets and binding reinforce the points that take the weight and abrasion of nails and tools.
The pouch has a deep main pocket, a mesh pocket in front of it and narrow holders for elongated tools along the top edge of the mesh pocket. You can see through the mesh what is in the front pocket.
The pouch is made of black and red nylon fabric and weighs 156 g. According to the manufacturer’s care label, the pouch can be washed in a washing machine at 30 °C.
Uses and suitability:
The tool pouch keeps fixings and small tools on the worker’s belt. There is no need to fetch supplies from the toolbox for every fixing.
- Timber construction and framing: Nails and screws are right next to the hammer or screwdriver when fixing framing, battens or boarding. The pouch hangs on a separate work belt, for example the Yato tool belt for tool pouches and trousers 90–120 cm.
- Installation and repair work: Screws, nuts, screwdriver bits and drill bits stay sorted in the main and front pockets when fitting fixings to walls, ceilings or furniture.
- Working on ladders and scaffolding: With supplies on the belt, your hands stay free for climbing and holding on.
- Plasterboard and panelling work: Board screws and screwdriver bits are close at hand when fixing boards to the frame. If you need more compartments, the larger Yato tool belt polyester 600D 14 pockets is a good fit.
Package contents:
- 1 × Yato tool pouch YT-7416
The work belt is not included.
Features:
- Deep main pocket: Long nails and screws fit completely inside the pocket.
- Mesh pocket at the front: A separate front pocket for small parts such as screwdriver bits and drill bits. You can see the contents through the mesh.
- Narrow holders: The top edge of the mesh pocket has sewn compartments and an elastic loop for elongated tools.
- Reinforced seams: The seams are finished with edge binding and the most heavily loaded points with steel rivets.
- Hard-wearing nylon: The light, flexible fabric suits a pouch that hangs on a work belt.
- Machine washable: According to the manufacturer’s care label, the pouch is washed in a washing machine at 30 °C.
Technical specifications:
- Product type: nail and tool pouch for a work belt
- Material: nylon
- Mechanical durability: seams reinforced with steel rivets and edge binding
- Pockets: deep main pocket, mesh front pocket and narrow holders
- Colour: black and red
- Washing: machine wash 30 °C
User instructions for the Yato belt tool pouch:
Attach the pouch to the work belt before starting work. Sort the supplies into the different parts of the pouch.
- Attaching: Hang the pouch on the work belt and position it on the belt so that the opening of the pouch is within reach.
- Sorting: Put long nails and screws in the main pocket, small parts such as screwdriver bits and drill bits in the mesh pocket, and elongated tools in the narrow holders.
- Sharp tools: Place sharp tools in the holders point down so that they do not prick your hand or clothing.
- At the end of work: Empty the pouch and shake out metal dust and debris.
- Washing: If needed, wash a dirty pouch in a washing machine at 30 °C and let it dry before the next use.
- Inspection: Check the seams and rivets from time to time. Take the pouch out of use if the fabric is punctured or a seam has opened. Store the pouch in a dry place.
Warnings:
- Sharp objects: Nails, screws and blades can puncture the fabric or prick your hand. Place sharp tools in the pouch point down.
- Load: Do not fill the pouch so heavily that the belt or the pouch attachment stretches or tears.
- Working at height: On scaffolding and ladders, make sure that supplies cannot fall out of the pouch onto people below.
- Not personal protective equipment: The pouch does not protect against impacts, cuts or heat.
- Heat and sparks: Keep the nylon pouch away from open flames, welding sparks and hot surfaces.
- Children: Store the pouch and the small parts in it out of the reach of children.
Frequently asked questions (FAQ):
What is the Yato belt tool pouch for?
The Yato tool pouch YT-7416 is a deep nylon pouch that hangs on a work belt. It carries long nails, screws and nuts as well as small tools such as screwdriver bits, drill bits and screwdrivers.
Is a work belt included with the Yato tool pouch YT-7416?
No, it is not. The delivery includes the Yato nylon tool pouch YT-7416, which hangs on a separate work belt.
How are the seams of the Yato tool pouch YT-7416 reinforced?
The seams of the nylon fabric of the Yato tool pouch YT-7416 are finished with edge binding. The most heavily loaded points are also reinforced with steel rivets.
What pockets does the Yato tool pouch YT-7416 have?
The Yato tool pouch YT-7416 has a deep main pocket for long nails and screws, a mesh front pocket for small parts and narrow holders for elongated tools.
Can the Yato tool pouch YT-7416 be machine washed?
Yes. According to the manufacturer’s care label, the nylon tool pouch YT-7416 can be washed in a washing machine at 30 °C. Empty the pouch of nails and other metal parts before washing.
How much does the Yato tool pouch YT-7416 weigh?
The Yato nylon tool pouch YT-7416 weighs 156 g without its contents.
Recycling instructions:
The Yato belt tool pouch consists of nylon fabric and steel rivets. Empty the pouch before disposal and sort nails, screws and other metal parts into metal collection. Dispose of a pouch at the end of its life according to local waste management instructions, usually as mixed waste. Sort the cardboard packaging into cardboard collection.
