Description
Procat square, metal is a technical measuring tool designed for verifying a 90-degree angle between pieces and for precise installation work. The tool is made from a single piece of metal, which makes its construction seamless. Being seamless is a critical feature for measuring accuracy, as it removes the possible error margins associated with joints and ensures that the angle stays unchanged even in harder use.
This square is the same thickness throughout, with no separate stock pieces or shoulders. This uniform thickness lets you place the tool completely flat against the workpiece on either side, which is an advantage especially in marking work and when you want to fit the tool into narrow gaps. The flat construction also makes storage and transport among other tools easier.
The long sides of the product are optimised especially for handling large pieces and structures. The longer the side of a square, the smaller the deviations from perpendicularity that can be detected further from the corner point. This makes the tool essential equipment where extreme accuracy is needed in installing large board materials or frame structures.
The material is chosen to withstand mechanical stress and keep its shape at different temperatures. The metal construction gives enough weight for the tool to stay steadily in place during marking, while being nimble enough to handle with one hand. The surface is finished so that it repels dirt and allows clear readability or marking directly along the edge of the tool.
The Procat square gives a reliable reference point for all structural installations. Its simple but effective design answers the need for a straight, stable line without extra moving parts or complex adjustment mechanisms.
Intended use:
- Measuring and checking perpendicularity: The square is used mainly to make sure that two surfaces or pieces are at exactly 90 degrees to each other. The long sides let you check over a wide radius, which is essential when assembling large furniture frames, installing door openings or preparing metal structures for welding, for example. The tool lets you spot errors at an early stage, while correction is still possible.
- Marking and drawing on large surfaces: Thanks to its seamless construction and uniform thickness, the square is an excellent guide for marking pens or scribers. It is widely used to mark cutting lines on board materials such as plasterboard, plywood or metal sheet. As there are no stock pieces, the tool lies completely flat on the material, which stops the pen tip from slipping under the tool and guarantees a straight line.
- Installation work and aligning structures: During construction, the square is used to align studs, beams and other structural parts. Its ability to show an accurate angle over a long distance makes it a reliable aid when you want to make sure structures rise straight and balanced. The metal construction also lets you use it as a guide in certain cutting tasks that need a sturdy edge.
Package contents:
- 1 x Procat square, metal, seamless model
Features:
- Seamless construction: Made from one piece without joints for maximum stability.
- Uniform thickness: No stock pieces, allows use on both sides and easy positioning on surfaces.
- Large sides: Designed especially for measuring long pieces and large surfaces.
- All-metal body: Withstands hard mechanical use and keeps its shape.
- Multi-purpose edge: Works both as a measuring tool and as a precise drawing guide.
Technical specifications:
- Material: Metal.
- Construction: Seamless, the same thickness throughout.
- Angle: 90°.
- Type: Installation square.
Procat square instructions for use:
Before use, carefully clean loose dirt or sawdust off the sides of the square and the surface to be measured, so that dirt does not distort the result. Place one side of the square tightly against the edge of the workpiece and check perpendicularity from the opposite side. When using the square for marking, press the tool lightly but steadily against the surface and draw the marking line along the edge. Store the square on a flat surface or hanging up so that it is not exposed to twisting. Avoid dropping the tool on hard surfaces, so that the 90-degree angle accuracy stays optimal.
Warnings:
Handle the metal square with care, as its corners and edges can be sharp. Wear protective gloves if you move a large metal tool quickly. Do not use the square as a lever or chisel, as it is a precision tool and can be bent by misuse. Make sure the storage place is dry to prevent rust, unless the tool is made of special stainless steel.
Frequently asked questions (FAQ):
What is the benefit of a seamless construction?
A seamless construction means that the tool is made from a single piece of metal, so there are no joints or rivets that could loosen and weaken the accuracy of the 90-degree angle over time.
Can this square be used on both sides?
Yes, because the product is the same thickness throughout and has no stock or shoulder, it can be used and placed against surfaces from either side.
Is this suitable for use in welding work?
Thanks to its metal construction, it withstands heat better than plastic or wooden equivalents, but it is advisable to avoid direct contact with the arc or welding spatter to keep the surface smooth.
Recycling instructions:
The metal square itself is 100% recyclable and should be disposed of as metal waste so that the raw material can be reused.
