Description
BeaverCraft carving knife set bird is a beginner’s carving kit that contains the tools, wood blanks, finishing supplies and an illustrated instruction book in Finnish for carving one bird figure. Thanks to the step-by-step instruction book, the set also suits carvers with no previous experience of woodcarving. The knife in the set is the C1M model, with a blade length of 60 mm and a width of 14 mm; the handle length is 105 mm.
The blade is 1066 carbon steel and hardened to 57–59 HRC. The bevel is ground to 20 degrees, which gives a thin, sharp edge for soft wood. The manufacturer does not recommend the tool for hardwood, as the fine edge dulls faster in it.
The handle is ash and treated with linseed oil. The design is symmetrical, so the knife suits both right- and left-handed users. The knife is supplied factory-sharpened and ready to use, and the steel has a 10-year warranty that does not cover wear, loss of sharpness, misuse or neglected maintenance.
The pack contains two wood blanks: a lime blank and a cherry blank. Lime is soft and even-grained and cuts easily; cherry is denser and holds details more precisely. Finishing supplies include sandpaper and beeswax, and for blade maintenance a leather strop and polishing paste. The manufacturer’s recommended age is 14 years, and adult supervision is recommended for younger users. BeaverCraft carving knife set bird is the easiest project in the range; the horse figure to be painted is BeaverCraft carving knife set Dala horse, starter kit, the three-dimensional figure BeaverCraft carving knife set wizard, starter kit and the spoon project, which needs two knives, BeaverCraft carving knife set spoon, starter kit.
Intended use and suitability:
The set is intended for woodcarving by hand: carving one bird figure following the instructions and learning carving techniques.
- A first carving project without previous experience: the ready blanks, the pattern and the illustrated instruction book in Finnish guide the work step by step and remove the need to source materials; one knife and table space are enough for the work.
- Practising basic techniques: the pull grip, thumb push and removing shavings are learned through one rounded figure.
- Two wood species: the lime blank is used to practise shaping, and the cherry blank shows how denser wood needs shorter shavings and more frequent stropping.
- Supervised carving: the manufacturer’s recommended age is 14 years; a younger user needs adult supervision and cut-protection tape on the fingers.
- Other carving projects: the C1M knife, leather strop and polishing paste stay in use for other carving projects once the set is finished.
Package contents:
- BeaverCraft C1M carving knife, blade 60 mm, factory-sharpened
- Lime blank for the bird figure
- Cherry blank for the bird figure
- Pattern template for transferring the shape to the wood
- Sandpaper, 5 pcs in different grits
- Beeswax for finishing
- Leather strop
- Polishing paste
- Cut-protection tape for fingers
- Plasters
- Illustrated step-by-step instruction book in Finnish
Features:
- C1M knife model: blade length 60 mm and width 14 mm; the size suits both shaping and details on a small figure.
- 1066 carbon steel: takes a thin edge and sharpens on a leather strop without machines.
- Hardness 57–59 HRC: the edge withstands cutting in soft wood without chipping.
- 20° bevel: ground for soft wood; the manufacturer does not recommend hardwood.
- Ash handle: linseed oil treated, length 105 mm, symmetrical for both left- and right-handed use.
- Two wood species: lime and cherry in the same pack.
- Blade maintenance included: the leather strop and polishing paste keep the edge in condition throughout the work.
- Finishing set: five sandpapers and beeswax for treating the surface.
- Safety supplies: cut-protection tape and plasters.
- 10-year warranty: covers the steel, not wear or loss of sharpness.
Technical specifications:
- Knife model: BeaverCraft C1M.
- Blade length: 60 mm.
- Blade width: 14 mm.
- Handle length: 105 mm.
- Blade material: 1066 carbon steel.
- Hardness: 57–59 HRC.
- Bevel angle: 20°.
- Handle material: ash, linseed oil treatment.
- Handedness: right- and left-handed.
- Wood blanks: 2 pcs, lime and cherry.
- Sandpaper: 5 pcs, different grits.
- Recommended age: 14 years.
- Warranty: 10 years on the steel.
BeaverCraft carving knife set bird instructions for use:
1. Preparation: Set aside a sturdy table and good lighting. Wrap cut-protection tape around your thumb and index finger. Check that the blade is firmly in the handle.
2. Transferring the pattern: Place the pattern template on the side of the blank and draw the outline. Also mark the centre line so that the shape stays symmetrical.
3. Rough shaping: Remove excess wood with short, controlled shavings away from yourself. Cut with the grain or at an angle; cutting against the grain tears the surface.
4. Rounding the shape: Round the breast, back and tail with a pull grip, and check the shape against the pattern template from both sides.
5. Blade maintenance: Strop the blade on the leather strop with polishing paste every few minutes. A dull blade needs more force and slips more easily.
6. Sanding: Sand the surface with the coarsest paper and work through to the finest. Remove the dust before finishing.
7. Finishing: Rub beeswax into the surface and polish with a cloth. Repeat the treatment when the surface turns dull.
8. Maintenance: Wipe the blade dry after use and oil it lightly; carbon steel rusts in damp conditions. Store the knife in a dry place with the blade protected.
Warnings:
- The knife is very sharp and factory-sharpened. Always cut away from yourself and keep your other hand out of the path of the blade.
- The set is not a toy. Keep out of the reach of children; a child may use the tools only under adult supervision.
- The manufacturer’s recommended age is 14 years; adult supervision is recommended for younger users depending on their experience and motor skills.
- Use cut-protection tape on your fingers; in the thumb push, the thumb presses on the back of the blade, not the edge.
- A dull blade slips more easily than a sharp one, so strop the edge regularly.
- Do not use the knife as a lever or chisel, or for cutting materials other than wood; the blade can break under sideways load.
- The polishing paste and wax are not edible; wash your hands after handling them.
- Wood dust can irritate the respiratory tract; sand in a well-ventilated space.
Frequently asked questions (FAQ):
What does BeaverCraft carving knife set bird contain? The C1M carving knife, a lime and a cherry blank, a pattern template, five sandpapers, beeswax, a leather strop and polishing paste, cut-protection tape, plasters and an illustrated instruction book in Finnish.
Is BeaverCraft carving knife set bird suitable for a first-timer? Yes. The illustrated instruction book in Finnish guides you step by step through carving the bird figure, so no previous experience of woodcarving is needed.
Does the knife need sharpening before use? No. The knife is factory-sharpened and ready to use; light stropping on the leather strop supplied is enough to start with.
What age group is the set suitable for? The manufacturer recommends an age of 14. A younger user needs adult supervision.
What wood are the blanks? One blank is lime and the other cherry. Lime is softer and easier to carve; cherry is denser.
Can the tools in the set be used for other carving? Yes. The C1M knife, strop and polishing paste are general woodcarving tools and can be used once the project is finished.
How is the blade kept sharp? By stropping on the leather strop with polishing paste every few minutes. When stropping no longer restores the edge, the blade is honed on a fine stone at an angle of 20 degrees.
What is the difference between this and other BeaverCraft starter kits? This set has two wood blanks and a simple rounded shape. BeaverCraft carving knife set Dala horse, starter kit includes paints, BeaverCraft carving knife set wizard, starter kit three blanks and BeaverCraft carving knife set spoon, starter kit two knives for working a concave surface.
What does the 10-year warranty cover? Defects in the steel and construction. The warranty does not cover normal wear, loss of sharpness, misuse, neglected maintenance or modifications made by the user.
Recycling instructions:
Sort the cardboard packaging and instruction book into cardboard and paper. Wood shavings and blank offcuts go into wood waste or energy waste. Sort a discarded knife into metal collection and the wooden handle into wood waste; protect the sharp edge before disposal, for example by taping cardboard over it. Wax residue and used sandpaper go into mixed waste.
