Skip to content

Mikov coloured drawing pins 100 pcs

Steel drawing pins with a plastic-coated flat head in a colour assortment, 100 pcs per box. Hold a sheet tightly against cork and felt boards and mark items by colour.

Product number: 25-20202013 EAN: 8595004381474 Inner box: 10 Outer box: 100 Unit: pack Contents: 100 pcs RRP: Brand:

Description

Mikov coloured drawing pins are steel pins whose flat head is covered with a coloured plastic layer. The pin is pressed with a finger into a soft base, so the steel point pierces the sheet being fixed and stays in place held by the base. The pack contains 100 pins in a colour assortment.

The point and body are steel. Steel gives the point the stiffness needed to pierce cork, felt and soft wood without bending. The conical shape of the point concentrates the pressing force on a small area, so the pin sinks in with light finger pressure.

The plastic coating on the head forms a pressing surface that is wider and softer than a bare metal head. The coating spreads the pressure on the finger, so putting in and removing the pin does not press a metal edge into the skin. The coating also carries the colour: the assortment contains several basic colours that are used for marking and sorting.

The flat head holds the fixed sheet tightly against the base, unlike domed pins, which leave a gap under the paper. The same Mikov product family includes Mikov push pins 30 pcs, Mikov map pin 100 pcs colour assortment round head and Mikov paper clip 28 mm 75 pcs colour assortment plastic-coated, which cover other notice board and filing needs.


Intended use and suitability:

The pin fixes a thin sheet to a soft base temporarily and comes out leaving no mark other than a pinhole.

  • Notice boards: notes, timetables, shift rosters and reports on cork and felt boards; the flat head keeps the sheet smooth.
  • Maps and project boards: different colours mark locations, routes or task status directly on a map or plan.
  • Posters and drawings: light sheets on soft wood or a board wall that tolerates pinholes.
  • Colour sorting: the colours in the assortment tell departments, priorities or calendar weeks apart without separate stickers.
  • Model and craft work: holding thin material in place temporarily before gluing or sewing.

Package contents:

  • 100 pcs coloured drawing pins, colour assortment
  • Storage box

Features:

  • Steel point and body: the stiff point pierces cork, felt and soft wood without bending.
  • Plastic-coated head: the wide pressing surface spreads the pressure on the finger and protects from the metal edge.
  • Flat head: the fixed sheet presses tightly against the base, with no gap between the paper and the board.
  • Colour assortment: several basic colours for colour coding and marking.
  • Box of 100 pcs: a refill for a notice board or a classroom.
  • Reusable: the pin can be removed and put back without the point going blunt.

Technical specifications:

  • Model: 224-EZ.
  • Point and body: steel.
  • Head: flat, plastic-coated.
  • Colours: colour assortment.
  • Quantity: 100 pcs.

Mikov coloured drawing pins 100 pcs instructions for use:

Fixing: Place the sheet on the base and hold it in place with your free hand. Take a pin from the box by its coated head and push the point through the sheet perpendicularly into the base. Press with your thumb in the middle of the head until the point is fully in the base and the head touches the paper.

Removal: Grip the coated head with your thumb and index finger and pull straight out, parallel to the surface of the base. Pulling at an angle bends the point.

Base: Use cork, felt, soft wood or insulation board. A hard base such as concrete, brick or metal bends the point and can make the pin pop out.

Storage: Keep the pins in a closed box. Pick up dropped pins from the floor immediately.


Warnings:

  • The point is sharp and causes puncture wounds. Always handle the pin by its coated head.
  • A pin dropped on the floor can pierce the sole of a foot or a tyre. Pick up dropped pins immediately.
  • Small part: a swallowed pin causes serious internal injury and a choking hazard. Keep out of reach of children and pets.
  • Do not fix electrical wires or cables with a pin. The steel point pierces the insulation and causes a short circuit or electric shock.
  • Do not press the pin into a hard base. The point bends or the pin pops out towards your face.
  • Make sure there are no electrical wires, pipes or other structures behind the base that the point could damage.
  • Discard a pin with a bent point or chipped coating.

Frequently asked questions, FAQ:

Are Mikov coloured drawing pins made entirely of plastic? No. The point and body are steel; only the head is covered with coloured plastic.

What base can the pin be fixed into? Cork, felt, soft wood and insulation board. Concrete, brick, hardwood and metal bend the point.

What is the difference between a flat-head pin and a map pin? A flat-head pin is pressed in with the thumb and holds the sheet tightly against the base. A map pin has a round head and a long thin needle that marks a point on a map and comes out more easily.

How many colours are in the assortment? The assortment contains several basic colours. The colour mix varies from batch to batch.

Can the pin be reused? Yes, when it is pulled straight out. Pulling at an angle bends the steel point, and the pin no longer goes straight into the base.

Are the pins suitable for a painted wall? The pin leaves a pinhole in the wall and can loosen a flake of paint. A soft board wall tolerates pinholes; the pin does not sink into hard plaster.


Recycling instructions:

Sort used pins into metal collection. Collect them in a closed container, such as a jar, or wrapped in tape so that the points do not prick waste handlers. Sort the empty storage box into plastic or cardboard collection according to its packaging material.


Additional information

Product number

25-20202013

EAN

8595004381474

Inner box

10

Outer box

100

Retail packaging

Muovirasia, ripustettava

Added to range

2026-05-17

Myyntipakkauksen yksikkö

PKT

Myyntipakkauksen sisäyksikkö

KPL

Sisäyksikön määrä

100.000

TUOTEVERTAILU

Tuotevertailu:

Mikov värilliset nastat ovat teräksisiä, muovipinnoitetulla tasaisella päällä varustettuja nastoja 100 kappaleen rasiassa. Vertailussa muut ilmoitustaulukiinnittimet: pään muoto ja materiaali, kärkityyppi ja soveltuva alusta.

Tuote Pää Kärki Määrä Alusta Käyttö
Mikov värilliset nastat 100 kpl (224-EZ) Tasainen, muovipinnoitettu, värilajitelma Teräs, kartio 100 kpl Korkki, huopa, pehmeä puu Arkki tiiviisti taulua vasten, värikoodaus
Mikov Karttaneula 100 kpl värilajitelma pyöreä pää Pyöreä muovipää Ohut teräsneula 100 kpl Korkki, kartta-alusta Pisteen merkintä kartalla
Mikov Taulunastat 30 kpl Metallinen tasapää Teräs 30 kpl Korkki, puu Ilmoitustaulukiinnitys
Alco push pin -nastat Muovinen sylinteripää Teräs n. 50–100 kpl Korkki, huopa Otepää, helppo irrottaa
Läufer nastat Muovipinnoitettu tasapää Teräs n. 50–100 kpl Korkki, huopa Toimistokäyttö
Maped nastat Muovipää, lajitelma Teräs n. 100 kpl Korkki Koulu- ja toimistokäyttö

Ryhmä jakautuu kahteen: tasapäiset nastat painavat arkin tiiviisti alustaa vasten ja soveltuvat useamman arkin kiinnittämiseen, kun taas ote- ja sylinteripäiset push pin -nastat irtoavat kevyemmin sormin ja sopivat toistuvasti vaihdettaviin lappuihin. Karttaneula on näistä ohuin ja jättää pienimmän reiän, mutta se ei pidä arkkia tasaisena. Mikov-nastan muovipinnoitettu tasapää yhdistää tasaisen puristuksen ja pehmeän painopinnan, joten se kattaa molemmat käyttötavat yhdellä nastatyypillä.

GPSR

GPSR Dokumentti (Suomi):

Tämä asiakirja kattaa EU:n yleisen tuoteturvallisuusasetuksen (GPSR – General Product Safety Regulation, (EU) 2023/988) edellyttämät tiedot tuotteelle Mikov Värilliset nastat 100 kpl:

Tunnistetiedot

Tuote: nasta, tasainen muovipinnoitettu pää, värilajitelma
Brändi: Mikov
Valmistajan tuotenumero: 20202013
Mallimerkintä: 224-EZ
EAN: 8595004381474
Kärki ja runko: teräs
Pää: muovipinnoite
Pakkaus: säilytysrasia, 100 kpl

Käyttötarkoitus

Kevyiden arkkien, kuten muistilappujen, aikataulujen, karttojen ja julisteiden, väliaikainen kiinnittäminen pehmeään alustaan: korkki- ja huopataulu, pehmeä puu ja eristelevy. Tuote on tarkoitettu toimisto-, koulu- ja kotikäyttöön. Se ei ole lelu eikä kuormaa kantava kiinnitin, eikä sitä ole tarkoitettu koviin alustoihin, sähköjohtojen kiinnittämiseen tai ihoon kohdistuvaan käyttöön.

Lasten ja lemmikkien varoitukset

Tuote ei ole lelu. Nasta on pieni osa, jossa on terävä teräskärki: nieltynä tai hengitettynä se aiheuttaa vakavan sisäisen vamman ja tukehtumisvaaran, ja sama riski koskee lemmikkejä. Lattialle pudonnut nasta lävistää paljaan jalkapohjan tai tassun. Säilytä nastat suljetussa rasiassa lasten ja lemmikkien ulottumattomissa ja kerää pudonneet nastat heti pois. Lapset saavat käyttää nastoja vain aikuisen valvonnassa.

Käyttöohje ja turvatiedot

Tarkasta nasta ennen käyttöä: taipunut kärki tai lohjennut pinnoite poistetaan käytöstä. Ota nasta rasiasta aina pinnoitetusta päästä. Aseta kärki arkin läpi kohtisuoraan alustaan ja paina peukalolla pään keskeltä. Irrota nasta tarttumalla päähän ja vetämällä suoraan ulos; vinottain vetäminen taipuu kärjen. Älä paina nastaa kovaan alustaan, älä kiinnitä sillä sähköjohtoa tai kaapelia äläkä lyö nastaa vasaralla. Varmista, ettei alustan takana ole johtoa tai putkea. Säilytä nastat suljetussa rasiassa.

Toiminta ja suojatoimet

Toiminta on mekaaninen: kartiomainen teräskärki lävistää arkin ja tunkeutuu pehmeään alustaan, jonka kitka pitää nastan paikallaan, ja tasainen pää painaa arkin alustaa vasten. Suojatoimet: muovipinnoite muodostaa leveän painopinnan, joka pitää sormen erossa metallireunasta; säilytysrasia pitää kärjet suojassa; nastan tarkastus ennen käyttöä ja pudonneiden nastojen kerääminen estävät pistovammat. Tuotteessa ei ole sähköisiä osia.

Ympäristöolosuhteet

Käyttö ja säilytys kuivassa sisätilassa huoneenlämmössä. Kosteus ruostuttaa teräskärjen, jolloin se heikkenee ja voi katketa alustaan. Vältä pitkäaikaista säilytystä kosteassa tilassa ja kuivaa rasia, jos se kastuu.

Riskiarviot ja riskikartoitus

Pistovamma sormeen: kärkeen tartutaan päädyn sijasta tai nasta on lattialla – hallitaan käsittelyllä pinnoitetusta päästä, säilytyksellä rasiassa ja pudonneiden nastojen keräämisellä. Nielemis- ja tukehtumisvaara: pieni terävä osa lapsen tai lemmikin ulottuvilla – hallitaan säilytyksellä ja valvonnalla. Sähköisku ja oikosulku: nastan käyttö johdon kiinnittämiseen tai kärjen osuminen piiloasennettuun johtoon – hallitaan käyttöohjeen kiellolla ja alustan tarkastuksella. Silmävamma: kovasta alustasta ponnahtava nasta – hallitaan alustan rajauksella pehmeisiin materiaaleihin. Kärjen katkeaminen alustaan: ruostunut tai taipunut nasta – hallitaan kuivalla säilytyksellä ja vaurioituneiden nastojen poistamisella käytöstä.

Valmistaja

Mikov s.r.o.
Mikulášovice 741
407 79 Mikulášovice
Tšekki
+420 412 394 113
sales@mikov.cz
www.mikov.cz

EU-maahantuoja / vastuullinen talouden toimija (GPSR) tiedot:

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Suomi
asiakaspalvelu@toolcat.fi
+358442703795


GPSR-dokument (Svenska):

Detta dokument omfattar de uppgifter som krävs enligt EU:s allmänna produktsäkerhetsförordning (GPSR – General Product Safety Regulation, (EU) 2023/988) för produkten Mikov färgade häftstift 100 st:

Identifieringsuppgifter

Produkt: häftstift, platt plastbelagt huvud, färgsortiment
Varumärke: Mikov
Tillverkarens artikelnummer: 20202013
Modellbeteckning: 224-EZ
EAN: 8595004381474
Spets och stomme: stål
Huvud: plastbeläggning
Förpackning: förvaringsask, 100 st

Avsedd användning

Tillfällig uppsättning av lätta ark, såsom minneslappar, scheman, kartor och affischer, på mjukt underlag: kork- och filttavla, mjukt trä och isolerskiva. Produkten är avsedd för kontor, skola och hem. Den är inte en leksak och inte ett bärande fäste, och den är inte avsedd för hårda underlag, för uppsättning av elledningar eller för användning mot hud.

Varningar för barn och husdjur

Produkten är inte en leksak. Ett häftstift är en liten del med vass stålspets: vid förtäring eller inandning orsakar det allvarlig inre skada och kvävningsrisk, och samma risk gäller husdjur. Ett stift på golvet går igenom en bar fotsula eller en tass. Förvara stiften i sluten ask utom räckhåll för barn och husdjur och plocka genast upp tappade stift. Barn får använda häftstift endast under uppsikt av vuxen.

Bruksanvisning och säkerhetsinformation

Kontrollera stiftet före användning: ett böjt stift eller en flisad beläggning ska kasseras. Ta alltid stiftet ur asken i det belagda huvudet. Sätt spetsen genom arket vinkelrätt mot underlaget och tryck med tummen mitt på huvudet. Ta bort stiftet genom att gripa huvudet och dra rakt ut; snedt drag böjer spetsen. Tryck inte in stiftet i hårt underlag, fäst inte elledningar eller kablar med det och slå inte på stiftet med hammare. Kontrollera att det inte finns ledning eller rör bakom underlaget. Förvara stiften i sluten ask.

Funktion och skyddsåtgärder

Funktionen är mekanisk: den koniska stålspetsen går genom arket och tränger in i det mjuka underlaget, vars friktion håller stiftet på plats, och det platta huvudet pressar arket mot underlaget. Skyddsåtgärder: plastbeläggningen bildar en bred tryckyta som håller fingret borta från metallkanten; förvaringsasken skyddar spetsarna; kontroll före användning och upplockning av tappade stift förebygger stickskador. Produkten har inga elektriska delar.

Miljöförhållanden

Användning och förvaring torrt inomhus i rumstemperatur. Fukt rostar stålspetsen, som då försvagas och kan brytas av i underlaget. Undvik långvarig förvaring i fuktigt utrymme och torka asken om den blir blöt.

Riskbedömning och riskkartläggning

Stickskada i fingret: man griper spetsen i stället för huvudet, eller stiftet ligger på golvet – hanteras genom att gripa det belagda huvudet, förvaring i ask och upplockning av tappade stift. Förtärings- och kvävningsrisk: liten vass del inom räckhåll för barn eller husdjur – hanteras med förvaring och uppsikt. Elstöt och kortslutning: stiftet används för att fästa en ledning, eller spetsen träffar en dold ledning – hanteras med förbudet i bruksanvisningen och kontroll av underlaget. Ögonskada: stiftet studsar från ett hårt underlag – hanteras genom att begränsa underlaget till mjuka material. Spetsbrott i underlaget: rostat eller böjt stift – hanteras med torr förvaring och genom att kassera skadade stift.

Tillverkare

Mikov s.r.o.
Mikulášovice 741
407 79 Mikulášovice
Tjeckien
+420 412 394 113
sales@mikov.cz
www.mikov.cz

EU-importör / ansvarig ekonomisk aktör (GPSR):

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Finland
asiakaspalvelu@toolcat.fi
+358442703795


GPSR Document (English):

This document covers the information required under the EU General Product Safety Regulation (GPSR – General Product Safety Regulation, (EU) 2023/988) for the product Mikov coloured drawing pins 100 pcs:

Identification details

Product: drawing pin, flat plastic-coated head, colour assortment
Brand: Mikov
Manufacturer’s product number: 20202013
Model designation: 224-EZ
EAN: 8595004381474
Point and shank: steel
Head: plastic coating
Packaging: storage box, 100 pcs

Intended use

Temporary fixing of light sheets, such as notes, schedules, maps and posters, to a soft base: cork and felt boards, softwood and insulation board. The product is intended for office, school and home use. It is not a toy or a load-bearing fastener, and it is not intended for hard bases, for fixing electrical cables or for use against the skin.

Warnings for children and pets

The product is not a toy. A drawing pin is a small part with a sharp steel point: if swallowed or inhaled, it causes serious internal injury and a choking hazard, and the same risk applies to pets. A pin dropped on the floor pierces a bare sole or paw. Keep the pins in a closed box out of the reach of children and pets and pick up dropped pins immediately. Children may use drawing pins only under adult supervision.

Instructions for use and safety information

Inspect the pin before use: a pin with a bent point or chipped coating is taken out of use. Always take the pin out of the box by its coated head. Push the point through the sheet perpendicular to the base and press with your thumb on the centre of the head. Remove the pin by gripping the head and pulling straight out; pulling at an angle bends the point. Do not press the pin into a hard base, do not use it to fix an electrical wire or cable and do not strike the pin with a hammer. Make sure there is no wire or pipe behind the base. Store the pins in a closed box.

Operation and protective measures

Operation is mechanical: the conical steel point pierces the sheet and penetrates the soft base, whose friction holds the pin in place, and the flat head presses the sheet against the base. Protective measures: the plastic coating forms a wide pressing surface that keeps the finger away from the metal edge; the storage box keeps the points covered; inspecting the pins before use and picking up dropped pins prevent puncture injuries. The product has no electrical parts.

Environmental conditions

Use and storage in dry indoor conditions at room temperature. Moisture rusts the steel point, which then weakens and may break off in the base. Avoid prolonged storage in damp areas and dry the box if it gets wet.

Risk assessment and risk mapping

Puncture injury to the finger: the point is gripped instead of the head, or the pin is on the floor – controlled by handling the pin by its coated head, storage in the box and picking up dropped pins. Swallowing and choking hazard: a small sharp part within reach of a child or pet – controlled by storage and supervision. Electric shock and short circuit: using the pin to fix a wire, or the point hitting a concealed wire – controlled by the prohibition in the instructions for use and checking the base. Eye injury: a pin bouncing off a hard base – controlled by limiting the base to soft materials. Point breaking off in the base: a rusted or bent pin – controlled by dry storage and taking damaged pins out of use.

Manufacturer

Mikov s.r.o.
Mikulášovice 741
407 79 Mikulášovice
Czech Republic
+420 412 394 113
sales@mikov.cz
www.mikov.cz

EU importer / responsible economic operator (GPSR):

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Finland
asiakaspalvelu@toolcat.fi
+358442703795


GPSR-i dokument (Eesti):

Käesolev dokument sisaldab teavet, mida ELi üldine tooteohutusmäärus (GPSR – General Product Safety Regulation, (EL) 2023/988) nõuab toote Mikov värvilised rõhknaelad 100 tk kohta:

Identifitseerimisandmed

Toode: rõhknael, lame plastkattega pea, värvivalik
Kaubamärk: Mikov
Tootja tootenumber: 20202013
Mudeli tähis: 224-EZ
EAN: 8595004381474
Ots ja vars: teras
Pea: plastkate
Pakend: hoiukarp, 100 tk

Kasutusotstarve

Kergete lehtede, nagu märkmete, ajakavade, kaartide ja plakatite ajutine kinnitamine pehmele alusele: korgi- ja vilttahvlile, pehmele puidule ja isolatsiooniplaadile. Toode on ette nähtud kasutamiseks kontoris, koolis ja kodus. See ei ole mänguasi ega koormust kandev kinnitusvahend ning see ei ole ette nähtud kõvadele alustele, elektrijuhtmete kinnitamiseks ega kasutamiseks vastu nahka.

Hoiatused laste ja lemmikloomade kohta

Toode ei ole mänguasi. Rõhknael on väike terava terasotsaga detail: allaneelamisel või sissehingamisel põhjustab see raske sisevigastuse ja lämbumisohu ning sama oht kehtib lemmikloomade kohta. Põrandale kukkunud rõhknael läbistab paljad jalatallad või käpa. Hoidke rõhknaelu suletud karbis laste ja lemmikloomade käeulatusest eemal ning korjake kukkunud rõhknaelad kohe üles. Lapsed tohivad rõhknaelu kasutada ainult täiskasvanu järelevalve all.

Kasutusjuhend ja ohutusteave

Kontrollige rõhknaela enne kasutamist: kõverdunud otsaga või murenenud kattega rõhknael kõrvaldatakse kasutusest. Võtke rõhknael karbist alati kattega peast. Asetage ots läbi lehe risti alusega ja vajutage pöidlaga pea keskele. Eemaldage rõhknael peast haarates ja otse välja tõmmates; viltu tõmbamine painutab otsa. Ärge suruge rõhknaela kõvasse alusesse, ärge kinnitage sellega elektrijuhet ega kaablit ega lööge rõhknaela haamriga. Veenduge, et aluse taga ei oleks juhet ega toru. Hoidke rõhknaelu suletud karbis.

Toimimine ja kaitsemeetmed

Toimimine on mehaaniline: kooniline terasots läbistab lehe ja tungib pehmesse alusesse, mille hõõrdumine hoiab rõhknaela paigal, ning lame pea surub lehe vastu alust. Kaitsemeetmed: plastkate moodustab laia survepinna, mis hoiab sõrme metallservast eemal; hoiukarp hoiab otsad kaetuna; rõhknaelte kontrollimine enne kasutamist ja kukkunud rõhknaelte ülesnoppimine hoiavad ära torkevigastused. Tootel ei ole elektrilisi osi.

Keskkonnatingimused

Kasutamine ja hoidmine kuivas siseruumis toatemperatuuril. Niiskus roostetab terasotsa, mis seetõttu nõrgeneb ja võib alusesse murduda. Vältige pikaajalist hoidmist niiskes ruumis ja kuivatage karp, kui see märjaks saab.

Riskihindamine ja riskide kaardistamine

Sõrme torkevigastus: haaratakse otsast pea asemel või rõhknael on põrandal – maandatakse kattega peast käsitsemise, karbis hoidmise ja kukkunud rõhknaelte ülesnoppimisega. Allaneelamis- ja lämbumisoht: väike terav detail lapse või lemmiklooma käeulatuses – maandatakse hoiustamise ja järelevalvega. Elektrilöök ja lühis: rõhknaela kasutamine juhtme kinnitamiseks või otsa sattumine peidetud juhtmesse – maandatakse kasutusjuhendi keelu ja aluse kontrollimisega. Silmavigastus: kõvalt aluselt tagasi põrkuv rõhknael – maandatakse aluse piiramisega pehmete materjalidega. Otsa murdumine alusesse: roostes või kõverdunud rõhknael – maandatakse kuiva hoiustamise ja kahjustatud rõhknaelte kasutusest kõrvaldamisega.

Tootja

Mikov s.r.o.
Mikulášovice 741
407 79 Mikulášovice
Tšehhi
+420 412 394 113
sales@mikov.cz
www.mikov.cz

ELi importija / vastutav ettevõtja (GPSR):

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Soome
asiakaspalvelu@toolcat.fi
+358442703795

VALMISTAJA

Manufacturer of high-quality knives and office supplies, with a history going back to 1794.

See the full Mikov range

TUKKUOSTAJALLE

The product is packed in inner boxes of 10 pcs and outer boxes of 100 pcs, so it can be ordered in full sales units.

The order code is 25-20202013 and the EAN 8595004381474 — you can search for the product by either, or by scanning the barcode in the search.

Sold-out items can be ordered on backorder: we ship what is in stock straight away and the rest as a separate delivery when the goods arrive at our warehouse.

Prices, stock levels and contract discounts are shown to logged-in business customers. Business customers buy on invoice. Stock items are typically delivered within 48 hours anywhere in Finland. Normal delivery time is 1–5 working days, depending on the shipping method and destination.