Description
Narex wooden mallet 98 mm is a striking tool turned from lacquered beech for driving wood chisels and carving chisels. The head diameter is 98 mm, the overall length 310 mm and the weight 721 g.
Beech gives more on impact than a steel hammer, so the end of the chisel handle does not split or mushroom. The same softer contact suits tapping dowels, wedges and joints into place without leaving marks on the surface of the workpiece.
The mallet head is bevelled, and its diameter is 98 mm. The bevels give an even striking face whatever angle the blow comes from, and the impact energy reaches the end of the chisel in a controlled way.
The lacquer protects the wood from moisture and dirt in workshop conditions. The 721 g weight is enough for chisel work without tiring the hand over long series, and the centre of gravity towards the head keeps the swing steady.
The mallet suits all common wooden- and plastic-handled chisels, for example the sets Narex wood chisel set Profi 6-12-16-20-26-32 and Narex carving chisel set Profi 8 pcs.
Intended use and suitability:
The mallet delivers blows to chisels and wooden parts without the impact damaging the handle or the surface of the workpiece.
- Wood chisels: notches, grooves and mortises, striking the end of the chisel one shaving at a time.
- Carving chisels: light, repeated blows to gouges and the V-chisel in carving work.
- Wood joints: tapping dowels, wedges and notched joints into place.
- Assembly: fitting furniture parts together without denting the surface.
Package contents:
- 1 pcs Narex wooden mallet 98 mm
Features:
- Solid beech: the dense-grained wood withstands impact and transfers the energy without cracking.
- Bevelled head: an even striking face from several striking angles.
- Lacquered surface: protects against moisture and keeps the mallet clean.
- 721 g weight: enough impact energy for chisel work, yet light over long series.
- Chisel-friendly: does not break the end of a wooden or plastic handle, unlike a steel hammer.
Technical specifications:
- Head diameter: 98 mm.
- Overall length: 310 mm.
- Weight: 721 g.
- Material: lacquered beech.
Narex wooden mallet 98 mm instructions for use:
Grip: Hold the lower part of the handle. A long lever gives power, a short grip gives precision for fine carving.
Striking: Hit the centre of the chisel end squarely with the mallet head. Control the force with the length of the swing and do not squeeze the handle: the mallet’s own weight does the work.
Maintenance: Wipe off shavings and dust with a dry cloth. Store indoors in a dry place; changes in humidity crack the wood. Lightly smooth a badly worn striking face with sandpaper.
Warnings:
- Do not strike nails, screws or metal parts with the mallet: the beech face dents and splinters.
- Check the head before use: a cracked mallet can throw off splinters on impact.
- Wear safety glasses for chisel work; shavings fly.
- Do not leave the mallet in a damp place or in water.
- Keep out of the reach of children.
Frequently asked questions (FAQ):
Why is a chisel struck with a mallet rather than a hammer? Beech gives on impact and spreads the force over a wide area, so the end of the chisel handle does not split or spread.
What wood is the Narex wooden mallet 98 mm made of? Turned beech with a lacquered surface.
How much does the mallet weigh? 721 g, with an overall length of 310 mm.
Is the mallet suitable for plastic-handled chisels? Yes. The beech head does not damage the end of a plastic handle.
How is the mallet maintained? Wipe it dry and store it in a dry place; the striking face can be smoothed with sandpaper.
Recycling instructions:
A wooden mallet at the end of its life is sorted as wood waste or into the energy fraction in accordance with local waste management regulations. The cardboard packaging goes to cardboard collection.
