Description
This three-piece Narex wood rasp set has been put together to meet varied woodworking and shaping needs in a professional environment. The set offers a comprehensive selection of the most common rasp profiles, which allow efficient material removal and working of different shapes. The 200 mm blade length is an optimal compromise between control and working speed, suitable both for more precise detail work and for rough levelling of larger surfaces.
The blades of the rasps are made of high-quality carbon steel, which is a traditional, proven material for hand tools that need durability. The hardness of the blades is optimised to 45 HRC. This degree of hardness ensures that the teeth of the rasps stay sharp for a long time when working wood, while the blade still keeps enough toughness to withstand use without breaking.
To ensure comfort and control, each rasp in the set has a traditional wooden handle. The handles are surface-treated (lacquered/stained), which protects the wood from dirt and moisture and gives a pleasant, secure grip even during longer work. A wooden handle also absorbs some of the vibration from work compared with hard plastic handles.
Intended use:
The wood rasp set is designed especially for joiners, restorers and other woodworking professionals who need reliable tools for shaping material.
- Shaping and carving wood: The different profiles in the set let you create even complex shapes. The flat rasp is suitable for fast working of flat surfaces and outside corners. The half-round rasp is ideal for shaping concave surfaces and gentle curves, while the round rasp can efficiently enlarge holes or work tight inside curves. A rasp removes material quickly before finer sanding.
- Fitting and finishing joints: In joinery, rasps are often used for fine-tuning and fitting mortise and tenon joints, dovetail joints and other wood joints. A rasp can remove exactly the amount of material needed to make the joint fit perfectly. The coarse teeth speed up work compared with a file when there is more material to remove.
Package contents:
- 1 pcs flat wood rasp, 200 mm
- 1 pcs half-round wood rasp, 200 mm
- 1 pcs round wood rasp, 200 mm
Features:
- Blade material: Made of carbon steel, which offers good wear resistance in woodworking.
- Hardness: The hardness of the blades is 45 HRC, an optimised balance between edge retention and durability.
- Blade length: The blade length of all the rasps is 200 mm, which is suitable for general use.
- Handle: Traditional wooden handle, surface-treated (lacquered/stained) for better durability and grip.
- Versatility of the set: Includes the three most common profiles (flat, half-round, round) for comprehensive work.
Technical specifications:
- Length: 200 mm
- Material: Carbon steel
- Hardness: 45 HRC
- Handle material: Surface-treated wood
- Number of pieces: 3 pcs
- Profiles: Flat, half-round, round
Wood rasp set instructions for use:
Use: A rasp is designed to remove material efficiently on the push stroke. Hold the rasp with both hands: one hand on the handle and the fingers of the other hand guiding the tip of the blade. Press the rasp against the workpiece as you push it forward. Lift the rasp off the workpiece on the return stroke so that the teeth do not go blunt unnecessarily. Use the full length of the blade to ensure even wear. Choose the rasp profile that suits the shape being worked.
Cleaning and maintenance: The teeth of the rasps clog with wood dust and shavings in use. Clean the blades regularly with a special file card. Brush the blade in the direction of the teeth to remove dirt. Do not use a wire brush, as it can blunt the teeth of the rasp. Store the rasps in a dry place. Avoid storing them loose in a toolbox where they can knock against each other or other metal tools, as this can damage the sharp teeth.
Warnings:
- Always wear safety glasses when working with rasps to protect your eyes from flying shavings and dust.
- Before use, make sure the wooden handle is firmly attached to the tang of the blade. Do not use the tool if the handle is loose or split.
- This product is intended only for working wood and similar soft materials. Do not use the rasps to work metal, as this destroys the teeth of the blade immediately.
- The blades and tips of the rasps can be sharp; handle with care to avoid cuts.
Frequently asked questions (FAQ):
Can these rasps be used to work metal?
No, these rasps are designed and hardened (45 HRC) specifically for working wood. Working metal blunts and damages the teeth very quickly.
How do I clean the rasp when it clogs with wood?
The best way to clean a rasp is to use a special file card. Brush the blade in the cutting direction of the teeth.
What material are the handles?
The handles are real wood, surface-treated (lacquered or stained) for better durability and grip.
Recycling instructions:
At the end of its life, the product must be disposed of properly. As it is a multi-material product, it is advisable to separate the parts:
- Metal part (blade): Can be recycled in metal collection.
- Wooden part (handle): Can be recycled as wood waste or used as energy waste in line with local recycling regulations.
- Packaging: The cardboard packaging can be recycled in carton collection.
