Skip to content

Yato solar and car charger 18V 2A

Charges Yato 18 V Li-Ion batteries from a vehicle’s 12–28 V socket or with the supplied 50 W solar panel, 2 A. USB-A 5 V / 2 A for mobile devices.

Product number: 46-YT-828504 EAN: 5906083097836 Inner box: 1 Outer box: 4 Unit: pcs RRP: Brand:

Description

Yato solar and car charger 18V charges Yato 18 V system Li-Ion batteries without mains power: either from a vehicle’s 12–28 V DC socket or with the supplied 50 W solar panel. The charging current is 2 A and the output voltage to the battery 21.5 V DC.

The charger also has a USB-Aport (5 V DC, 2 A), which charges a phone or other mobile device from the 18 V battery, the vehicle socket or the solar panel. This way the same battery can be used both in tools and as a power bank at the cottage, on a boat or at an allotment.

When charging from a vehicle, the charging times are: 2 Ah battery (YT-828461) 70 min, 3 Ah (YT-828462) 100 min, 4 Ah (YT-828463) 135 min, 6 Ah (YT-828464) 200 min and 9 Ah (YT-828465) 300 min. With the solar panel, the charging time depends on the amount of sunlight, the orientation of the panel, cloud cover and shading.

The solar panel has an aluminium frame and a folding support leg that sets the panel at an angle. The charging unit weighs 0.15 kg, and its indicator light shows the charging status. The charging unit has an IP rating of IPX0, so it is kept dry.


Uses and suitability:

The Yato solar and car charger 18V is intended for charging Yato 18 V batteries in places where mains power is not available.

  • Cottages and allotments: Charging batteries with the solar panel for garden tools and lights without a mains connection.
  • Sites and service vans: Charging batteries while driving from the vehicle’s 12–28 V socket, also in 24 V trucks and work machines.
  • Boating and camping: Charging 18 V batteries and a phone from the electrical system of a boat or motorhome or from the solar panel.
  • Backup power for mobile devices: The USB-A port charges a phone directly from the 18 V battery, for example during a power cut.

The charger charges batteries such as the Yato 18V Li-Ion battery. For faster charging on mains power, use the Yato battery charger 18V 2.2A, and for greater energy needs without the power grid, the Yato portable power station 504Wh 600W.


Package contents:

  • Charging unit for Yato 18 V batteries (with USB-A port)
  • Solar panel 50 W with cable and support leg
  • Power cable for the vehicle socket
  • Instruction manual

Battery not included.


Features:

  • Two power sources: Charging from a vehicle’s 12–28 V DC socket or a 50 W solar panel.
  • Charging current 2 A: a 4 Ah battery charges from the vehicle in about 135 minutes.
  • USB-A output 5 V / 2 A: Mobile devices are charged from the 18 V battery, the vehicle or the solar panel.
  • Charging indicator light: The indicator light on the housing shows standby, charging, a full battery, and battery overheating or a fault.
  • Wide input voltage: 12–28 V DC covers the 12 V systems of cars and the 24 V systems of heavy vehicles.
  • Solar panel support leg: The panel is set at an angle facing the sun.
  • Light charging unit: Weight 0.15 kg.
  • Yato 18 V compatibility: Charges Yato 18 V system Li-Ion batteries YT-828461–YT-828465.

Technical specifications:

  • Input voltage: 12–28 V DC (vehicle) / 50 W solar panel.
  • Charger type: vehicle charger with USB-A port and 50 W solar panel.
  • Operating voltage (battery): 18 V DC.
  • Output voltage: 21.5 V DC (battery) / 5 V DC (USB).
  • Output current: 2 A (battery) / 2 A (USB).
  • Battery type: Li-Ion.
  • Charging time from vehicle: YT-828461 70 min, YT-828462 100 min, YT-828463 135 min, YT-828464 200 min, YT-828465 300 min.
  • Charging time with solar panel: the same as from a vehicle when the panel is fully in sunlight under a cloudless sky.
  • Charging indicator light: yes.
  • IP rating: IPX0.
  • Charging unit weight: 0.15 kg.
  • Compatibility: all Yato 18 V system batteries.

Instructions for using the Yato solar and car charger 18V:

Charging from a vehicle: Push the battery into the charger. Connect the power cable plug to the charger and the cable to the vehicle socket. When charging is complete, unplug the cable first from the vehicle socket and then from the charger. Remove the battery by pressing the battery locking button and pulling the battery out.

Charging with the solar panel: Set the panel on its support leg fully in sunlight so that the surface is not shaded or covered, and keep it free of dust. Push the battery into the charger and the solar panel cable plug into the charger socket. When charging is complete, disconnect the panel plug and then the battery.

Charging a mobile device: Push an 18 V battery into the charger or connect the charger to the vehicle socket or the solar panel. Connect the device’s charging cable to the charger’s USB-A port. After charging, disconnect the USB plug first from the charger and then from the charged device.

Indicator light: Flashing green = waiting to charge, red lit = charging, green lit = battery charged, flashing red = battery overheated. A steady red light after the full charging time can mean a faulty battery.

Maintenance: Check the charger, cables and plugs before every use. Store the charging unit in a dry place and keep the surface of the solar panel clean.


Warnings:

  • Charge only Yato 18 V system Li-Ion batteries (YT-82842–YT-82845, YT-828461–YT-828465); charging other batteries can cause an electric shock or a fire.
  • The solar panel produces direct current whenever light falls on it. Cover the panel glass before opening the junction box cover.
  • The charging unit has an IP rating of IPX0: protect it from rain and moisture.
  • Do not modify the charger connection to fit the battery, and observe the polarity markings.
  • Do not smoke or bring open flames near the charger or battery. Charge in a well-ventilated place.
  • Do not use a charger with a damaged cable or housing; have damaged cables replaced at an authorised service centre.
  • The charger may be used by children over 8 only under supervision or with instruction. Keep the charger and panel out of the reach of children.

Frequently asked questions (FAQ):

How is the Yato solar and car charger 18V powered? From a vehicle’s 12–28 V DC socket or the supplied 50 W solar panel. The charger has no mains connection.

How long does it take to charge a 4 Ah battery? About 135 minutes from a vehicle. With the solar panel, the time is the same only in full sunlight under a cloudless sky; cloud and shade make it longer.

Can the charger charge a phone? Yes. The USB-A port supplies 5 V / 2 A from the 18 V battery, the vehicle socket or the solar panel.

Does the charger work in a 24 V truck? Yes. The input voltage range is 12–28 V DC.

Which batteries does the Yato solar and car charger 18V charge? Yato 18 V system Li-Ion batteries YT-828461–YT-828465 and the earlier YT-82842–YT-82845.


Recycling instructions:

The Yato solar and car charger 18V and the solar panel are electrical devices that must not be disposed of with mixed waste: take them to a waste electrical and electronic equipment (WEEE) collection point. Take rechargeable Li-Ion batteries to a battery collection point with the terminals taped. Sort the cardboard packaging into cardboard collection.


Additional information

Weight 5125 g
Product number

46-YT-828504

EAN

5906083097836

Inner box

1

Outer box

4

Added to range

2026-10-14

Item name SE

Yato Solpanel och billaddare sats för 18V system

Item name GB

Yato Solar Panel and Car Charger set for 18V system

Myyntipakkauksen yksikkö

KPL

TUOTEVERTAILU

Tuotevertailu: Yato aurinko- ja autolaturi 18V ja vastaavat ajoneuvolaturit

Taulukossa verrataan Yato aurinko- ja autolaturi 18V:n (YT-828504) teknisiä arvoja Yato-sisarmalliin ja muiden valmistajien 18 V akkujen ajoneuvolatureihin valmistajien ja jälleenmyyjien julkisten tuotetietojen mukaan.

Malli Virtalähde Latausvirta Latausaika (esimerkki) USB-lähtö Aurinkopaneeli
Yato Aurinko- ja autolaturi 18V 2A (YT-828504) ajoneuvo 12–28 V DC / aurinkopaneeli 2 A 4 Ah: 135 min 5 V / 2 A 50 W, mukana
Yato Autolaturi 18V 2A 12V pistokkeeseen (YT-828503) ajoneuvo 12–28 V DC 2 A 4 Ah: 135 min 5 V / 2 A –
Makita DC18SE ajoneuvo 12 V DC – 3 Ah: 60 min – –
Bosch GAL 1830 W-DC ajoneuvo, langaton lataus 3 A 4 Ah: 95 min (100 %) – –

Yato aurinko- ja autolaturi 18V on vertailun ainoa malli, jonka mukana toimitetaan aurinkopaneeli, ja sen tulojännitealue kattaa myös 24 V ajoneuvot. Makita- ja Bosch-laturit lataavat nopeammin, mutta ne tarvitsevat ajoneuvon sähköjärjestelmän eivätkä lataa mobiililaitteita USB:n kautta.

LIITTEET

GPSR

GPSR Dokumentti:

Tämä asiakirja kattaa EU:n yleisen tuoteturvallisuusasetuksen (GPSR – General Product Safety Regulation, (EU) 2023/988) edellyttämät tiedot tuotteelle:

Tunnistetiedot

Tuote: Yato Aurinko- ja autolaturi 18V 2A
Malli: YT-828504
EAN: 5906083097836
Tuotetyyppi: ajoneuvo- ja aurinkolaturi Yato 18 V Li-Ion-akuille, tulo 12–28 V DC / 50 W aurinkopaneeli, lähtö 21,5 V DC 2 A ja USB-A 5 V DC 2 A, IPX0
Toimitus: latausyksikkö, 50 W aurinkopaneeli tukijalalla ja kaapelilla, ajoneuvon virtajohto

Käyttötarkoitus

Yato 18 V -järjestelmän Li-Ion-akkujen lataus ajoneuvon pistorasiasta tai aurinkopaneelista sekä mobiililaitteiden lataus USB-liitännän kautta. Muiden akkujen lataaminen on kielletty.

Lasten ja lemmikkien varoitukset

Ei lasten leluksi. Laturia saavat käyttää yli 8-vuotiaat vain valvottuina tai turvalliseen käyttöön opastettuina; lapset eivät saa puhdistaa tai huoltaa laitetta ilman valvontaa. Säilytä latausyksikkö, johdot ja aurinkopaneeli lasten ja lemmikkien ulottumattomissa.

Käyttöohje ja turvatiedot

Lue käyttöohje ennen käyttöä. Lataa vain Yato 18 V -järjestelmän akkuja. Älä muokkaa laturin liitäntää ja noudata napaisuusmerkintöjä. Aurinkopaneeli tuottaa tasavirtaa aina valossa: peitä lasi ennen kytkentärasian kannen avaamista. Suojaa latausyksikkö kosteudelta ja sateelta. Älä tupakoi tai tuo avotulta lähelle. Tarkista laturi, johdot ja pistokkeet ennen jokaista käyttöä; älä käytä vaurioitunutta laitetta.

Toiminta ja suojatoimet

Latausyksikkö muuntaa ajoneuvon 12–28 V DC jännitteen tai aurinkopaneelin tuottaman virran 21,5 V DC 2 A latausvirraksi ja 5 V DC 2 A USB-virraksi. Suojatoimet: merkkivalo ilmaisee latauksen, täyden akun, akun ylikuumenemisen ja viallisen akun; järjestelmäkohtainen akkuliitäntä estää vääränlaisen akun liittämisen.

Ympäristöolosuhteet

Latausyksikkö on kotelointiluokaltaan IPX0 (ei suojattu vedeltä) ja pidetään kuivana. Aurinkopaneeli sijoitetaan kokonaan auringonvaloon ilman varjostusta; latausteho riippuu auringonvalosta, suuntauksesta ja pilvisyydestä. Lataus hyvin tuuletetussa paikassa.

Riskiarviot ja riskikartoitus

Tunnistetut riskit: sähköisku tai tulipalo väärän akun lataamisesta tai vaurioituneesta laitteesta (vain Yato 18 V -akut, ehjät johdot), aurinkopaneelin jännite valossa (lasi peitetään ennen kytkentärasian avaamista), kosteuden aiheuttama vaurio (kuiva sijoitus), akun ylikuumeneminen (merkkivalo, valvottu lataus), johtojen kompastumisvaara ajoneuvossa. Jäännösriskit minimoidaan noudattamalla käyttöohjetta.

Valmistaja

TOYA S.A.
ul. Sołtysowicka 13-15, 51-168 Wrocław
Puola
+48 71 32 46 200
export@yato.pl
www.toya.pl

EU-maahantuoja / vastuullinen talouden toimija (GPSR) tiedot:

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Suomi
asiakaspalvelu@toolcat.fi
+358442703795


GPSR-dokument:

Detta dokument omfattar de uppgifter som EU:s allmänna produktsäkerhetsförordning (GPSR – General Product Safety Regulation, (EU) 2023/988) kräver för produkten:

Identifiering

Produkt: Yato sol- och billaddare 18V 2A
Modell: YT-828504
EAN: 5906083097836
Produkttyp: fordons- och solladdare för Yato 18 V Li-ion-batterier, ingång 12–28 V DC / 50 W solpanel, utgång 21,5 V DC 2 A och USB-A 5 V DC 2 A, IPX0
Leverans: laddningsenhet, 50 W solpanel med stöd och kabel, strömkabel för fordonsuttag

Avsedd användning

Laddning av Li-ion-batterier i Yato 18 V-systemet från fordonets eluttag eller solpanel samt laddning av mobila enheter via USB-uttaget. Det är förbjudet att ladda andra batterier.

Varningar för barn och husdjur

Inte en leksak. Barn från 8 år får använda laddaren endast under tillsyn eller efter instruktion om säker användning; barn får inte rengöra eller underhålla apparaten utan tillsyn. Förvara laddningsenheten, kablarna och solpanelen utom räckhåll för barn och husdjur.

Bruksanvisning och säkerhetsinformation

Läs bruksanvisningen före användning. Ladda endast batterier i Yato 18 V-systemet. Modifiera inte laddarens anslutning och följ polaritetsmärkningarna. Solpanelen alstrar likström så snart den belyses: täck glaset innan kopplingsdosans lock öppnas. Skydda laddningsenheten mot fukt och regn. Rök inte och använd inte öppen eld i närheten. Kontrollera laddaren, kablarna och kontakterna före varje användning; använd inte en skadad apparat.

Funktion och skyddsåtgärder

Laddningsenheten omvandlar fordonets spänning 12–28 V DC eller strömmen från solpanelen till laddström 21,5 V DC 2 A och USB-ström 5 V DC 2 A. Skyddsåtgärder: indikatorn visar laddning, fulladdat batteri, överhettat batteri och defekt batteri; systemspecifik batterianslutning förhindrar anslutning av fel batteri.

Miljöförhållanden

Laddningsenheten har kapslingsklass IPX0 (inte skyddad mot vatten) och ska hållas torr. Solpanelen placeras helt i solljus utan skuggning; laddeffekten beror på solljus, riktning och molnighet. Ladda på en välventilerad plats.

Riskbedömning och riskkartläggning

Identifierade risker: elektrisk stöt eller brand vid laddning av fel batteri eller med skadad apparat (endast Yato 18 V-batterier, hela kablar), solpanelens spänning i ljus (glaset täcks innan kopplingsdosan öppnas), skador orsakade av fukt (torr placering), överhettat batteri (indikator, laddning under uppsikt), snubbelrisk från kablar i fordonet. Kvarstående risker minimeras genom att följa bruksanvisningen.

Tillverkare

TOYA S.A.
ul. Sołtysowicka 13-15, 51-168 Wrocław
Polen
+48 71 32 46 200
export@yato.pl
www.toya.pl

EU-importör / ansvarig ekonomisk aktör (GPSR):

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vanda
Finland
asiakaspalvelu@toolcat.fi
+358442703795


GPSR document:

This document covers the information required for the product under the EU General Product Safety Regulation (GPSR, (EU) 2023/988):

Identification

Product: Yato solar and car charger 18V 2A
Model: YT-828504
EAN: 5906083097836
Product type: vehicle and solar charger for Yato 18 V Li-ion batteries, input 12–28 V DC / 50 W solar panel, output 21.5 V DC 2 A and USB-A 5 V DC 2 A, IPX0
Supplied: charging unit, 50 W solar panel with stand and cable, vehicle power cord

Intended use

Charging Li-ion batteries of the Yato 18 V system from a vehicle power socket or a solar panel and charging mobile devices via the USB port. Charging other batteries is prohibited.

Warnings for children and pets

Not a toy. Children aged 8 and over may use the charger only under supervision or after instruction in safe use; children must not clean or maintain the appliance without supervision. Keep the charging unit, cables and solar panel out of reach of children and pets.

Instructions and safety information

Read the instruction manual before use. Charge only batteries of the Yato 18 V system. Do not modify the charger interface and observe the polarity markings. The solar panel produces direct current whenever it is exposed to light: cover the glass before removing the terminal junction box lid. Protect the charging unit from moisture and rain. Do not smoke or use open flames nearby. Check the charger, cables and plugs before each use; do not use a damaged appliance.

Operation and protective measures

The charging unit converts the vehicle voltage of 12–28 V DC or the power from the solar panel into a 21.5 V DC 2 A charging current and 5 V DC 2 A USB power. Protective measures: the indicator shows charging, full battery, overheated battery and faulty battery; a system-specific battery interface prevents connecting a wrong battery.

Environmental conditions

The charging unit has enclosure rating IPX0 (not protected against water) and must be kept dry. Place the solar panel fully in sunlight without shading; charging power depends on sunlight, orientation and cloud cover. Charge in a well-ventilated place.

Risk assessment

Identified risks: electric shock or fire from charging a wrong battery or using a damaged appliance (only Yato 18 V batteries, intact cables), solar panel voltage in light (cover the glass before opening the junction box), moisture damage (dry placement), battery overheating (indicator, supervised charging), tripping over cables in the vehicle. Residual risks are minimised by following the instruction manual.

Manufacturer

TOYA S.A.
ul. Sołtysowicka 13-15, 51-168 Wrocław
Poland
+48 71 32 46 200
export@yato.pl
www.toya.pl

EU importer / responsible economic operator (GPSR):

Toolcat Oy
1059567-7
Kalustetie 1, 01720 Vantaa
Finland
asiakaspalvelu@toolcat.fi
+358442703795

VALMISTAJA

A brand favoured by professionals: a wide range of hand and power tools; durable and innovative.

See the full Yato range

TUKKUOSTAJALLE

The product is packed in sales units of 4 pcs, so it can be ordered in full boxes.

The order code is 46-YT-828504 and the EAN 5906083097836 — you can search for the product by either, or by scanning the barcode in the search.

Sold-out items can be ordered on backorder: we ship what is in stock straight away and the rest as a separate delivery when the goods arrive at our warehouse.

Prices, stock levels and contract discounts are shown to logged-in business customers. Business customers buy on invoice. Stock items are typically delivered within 48 hours anywhere in Finland. Normal delivery time is 1–5 working days, depending on the shipping method and destination.